diff options
Diffstat (limited to 'tde-i18n-ru/install-sh')
| -rwxr-xr-x | tde-i18n-ru/install-sh | 394 |
1 files changed, 0 insertions, 394 deletions
diff --git a/tde-i18n-ru/install-sh b/tde-i18n-ru/install-sh deleted file mode 100755 index ca9c7c4c82d..00000000000 --- a/tde-i18n-ru/install-sh +++ /dev/null @@ -1,394 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2005-11-07.23 - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -posix_glob= -posix_mkdir= - -# Symbolic mode for testing mkdir with directories. -# It is the same as 755, but also tests that "u+" works. -test_mode=u=rwx,g=rx,o=rx,u+wx - -# Desired mode of installed file. -mode=0755 - -# Desired mode of newly created intermediate directories. -# It is empty if not known yet. -intermediate_mode= - -chmodcmd=$chmodprog -chowncmd= -chgrpcmd= -stripcmd= -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src= -dst= -dir_arg= -dstarg= -no_target_directory= - -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: --c (ignored) --d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. ---help display this help and exit. ---version display version info and exit. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG -" - -while test -n "$1"; do - case $1 in - -c) shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t) dstarg=$2 - shift - shift - continue;; - - -T) no_target_directory=true - shift - continue;; - - --version) echo "$0 $scriptversion"; exit $?;; - - *) # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - test -n "$dir_arg$dstarg" && break - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dstarg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" - shift # fnord - fi - shift # arg - dstarg=$arg - done - break;; - esac -done - -if test -z "$1"; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15 - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src ;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dstarg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dstarg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst ;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - posix_mkdir=false - if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then - posix_mkdir=true - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null - fi ;; - esac - - if - $posix_mkdir && { - - # With -d, create the new directory with the user-specified mode. - # Otherwise, create it using the same intermediate mode that - # mkdir -p would use when creating intermediate directories. - # POSIX says that this mode is "$(umask -S),u+wx", so use that - # if umask -S works. - - if test -n "$dir_arg"; then - mkdir_mode=$mode - else - case $intermediate_mode in - '') - if umask_S=`(umask -S) 2>/dev/null`; then - intermediate_mode=$umask_S,u+wx - else - intermediate_mode=$test_mode - fi ;; - esac - mkdir_mode=$intermediate_mode - fi - - $mkdirprog -m "$mkdir_mode" -p -- "$dstdir" - } - then : - else - - # mkdir does not conform to POSIX, or it failed possibly due to - # a race condition. Create the directory the slow way, step by - # step, checking for races as we go. - - case $dstdir in - /*) pathcomp=/ ;; - -*) pathcomp=./ ;; - *) pathcomp= ;; - esac - - case $posix_glob in - '') - if (set -f) 2>/dev/null; then - posix_glob=true - else - posix_glob=false - fi ;; - esac - - oIFS=$IFS - IFS=/ - $posix_glob && set -f - set fnord $dstdir - shift - $posix_glob && set +f - IFS=$oIFS - - for d - do - test "x$d" = x && continue - - pathcomp=$pathcomp$d - if test ! -d "$pathcomp"; then - $mkdirprog "$pathcomp" - # Don't fail if two instances are running concurrently. - test -d "$pathcomp" || exit 1 - fi - pathcomp=$pathcomp/ - done - obsolete_mkdir_used=true - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } && - - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dst"; then - $doit $rmcmd -f "$dst" 2>/dev/null \ - || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \ - && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\ - || { - echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - } || exit 1 - - trap '' 0 - fi -done |