DEB/UBU build scripts.

1) added support for Devuan distros
2) added more command line options for update_repositories.sh
3) bug fixes and improved user feedback
4) added link inside ubuntu distro

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

7 files changed, 153 insertions, 80 deletions

diff --git a/debian/_buildscripts/local/README.txt b/debian/_buildscripts/local/README.txt
index cbe44130a..1e12a01b9 100644
--- a/debian/_buildscripts/local/README.txt
+++ b/debian/_buildscripts/local/README.txt
@@ -27,7 +27,8 @@ A) Environment preparation
                  3_repo : local repo for package installation (to be configured in /etc/apt/sources.list)
                  buildscripts: contains a local copy of the build scripts, which can be modified as required
    - in TDE_DIR/1_git: 
-                 edeps  : contains extra dependency modules necessary to build TDE
+                 edeps  : contains extra dependency modules necessary to build TDE (this folder is not necessary
+                          is pre-built extra dependencies are used - see point 9 for more info)
                  hooks  : contains build hook scripts to execute ad-hoc code before and after the building process.
                           Mainly used to apply patches automatically during the building process
                           
@@ -45,11 +46,11 @@ A) Environment preparation
 
 5) Add your user to the sudo group (not required if you are root)
      su -c "adduser <username> sudo"
-   Optionally, consider extending your sudo timeout interval to avoid having to type your password too often
-   (this could be quite painful especially during long builds, which would not be able to complete if unattended).
-   To do this, type "sudo visudo" and then add "Defaults timestamp_timeout=<new timeout>", where the value is in
-   minutes. Use a value of -1 to set an infinite timeout.    
    Logout and login again to make sure the new settings are applied.
+   * Optionally, consider extending your sudo timeout interval to avoid having to type your password too often
+     (this could be quite painful especially during long builds, which would not be able to complete if unattended).
+     To do this, type "sudo visudo" and then add "Defaults timestamp_timeout=<new timeout>", where the value is in
+     minutes. Use a value of -1 to set an infinite timeout.    
 
 6) Copy the files from "TDE_DIR/1_git/tde-packaging/debian/_buildscripts/local/additional_files" folder
    to the respectivily named folders.
@@ -81,12 +82,14 @@ A) Environment preparation
        installing the extra dependency packages when TDE is installed.
 				* For R14.1.x series (repository branch "master")
 					# --- SLAVEK BANKO'S EXTRA DEPENDENCIES REPOSITORY ---
-					deb http://mirror.xcer.cz/trinity-tb <YOUR DISTRO> deps
+					# - temporarily disabled -
+					# - http://mirror.ppa.trinitydesktop.org/trinity-testing/dists <YOUR DISTRO> deps
+					deb http://mirror.ppa.trinitydesktop.org/trinity-sb <YOUR DISTRO> deps-r14
 				* For R14.0.x series (repository branch "r14.0.x")
 					# --- SLAVEK BANKO'S EXTRA DEPENDENCIES REPOSITORY ---
-					deb http://mirror.xcer.cz/trinity-sb <YOUR DISTRO> deps-r14
+					deb http://mirror.ppa.trinitydesktop.org/trinity-sb <YOUR DISTRO> deps-r14
 	     For example:
-		     deb http://mirror.xcer.cz/trinity-tb buster deps 
+		     deb http://mirror.ppa.trinitydesktop.org/trinity-sb buster deps 
 		 - install package dirmngr if required
 		 - import Slavek's GPG key into your apt keyring
 		   sudo apt-key adv --keyserver pool.sks-keyservers.net --recv-key A04BE668
@@ -136,15 +139,23 @@ When building sets of modules or the whole TDE, a global build summary is automa
   Script used to update the local clone of the git repositories.
   It is possible to update multiple branches as specified by the variable UPDATE_BRANCHES in the configuration
   file. After the update is completed, the local repositories will be switched to the branch specified by the
-  DEFAULT_REPO_BRANCH variable. The default branch can be overridden by using OVERRIDE_DEFAULT_REPO_BRANCH when
-  invoking the script. 
+  DEFAULT_REPO_BRANCH variable.
+  The script can also be used to switch the local repositories to a particular branch, without performing any update.
   Usage:
-    [OVERRIDE_DEFAULT_REPO_BRANCH="<branch name>"] update_git_repository.sh [options]
+    update_git_repository.sh [options]
   Options:
     -i  (Incremental) : in case the previous update was interrupted, continue from the last known updated module.
                         (useful on slow/unstable internet connections). If the previous update had completed, 
                         this option is ignored.
     -v  (Verbose)     : display and log more output. Useful for troubleshooting.
+    -ub "<branches>" (Update Branches) : allows to specify the branches to update. This override the variable
+                        UPDATE_BRANCHES in the configuration file. If a single branch is specified and the
+                        '-db'/'-sb' paraemters are not used, '-ub' can be used to update and switch a single branch.
+    -db <branch> (Default Branch) : allows to specify the default branch. This override the variable
+                        DEFAULT_REPO_BRANCH in the configuration file.
+                        This option is only used if the argument '-so' is not specified.
+    -so <branch> (Switch Only) : switch the local repositories to the specified branch, without doing any update.
+                        If '-ub' is used, the '-so' branch name must be one of those specified in the 'ub' branches.
 
 - build_module.sh
   Build a single module.
diff --git a/debian/_buildscripts/local/build_module.sh b/debian/_buildscripts/local/build_module.sh
index 18d55d778..50c9c3a14 100755
--- a/debian/_buildscripts/local/build_module.sh
+++ b/debian/_buildscripts/local/build_module.sh
@@ -122,11 +122,13 @@ export OPT_SHOW_LOGS
 echo -e "${CLightCyan}####  Processing module \"$MOD_NAME\"  ####${CNone}"
 
 # This folders must exists
-BASE_DIRS=("REPO_DIR" "BUILD_DIR" "SCRIPT_DIR" "REPO_TDE_MAIN" "REPO_TDE_PACKAGING" "REPO_EXTRA_DEPENDENCIES" "HOOK_DIR")
-
+BASE_DIRS=("REPO_DIR" "BUILD_DIR" "SCRIPT_DIR" "REPO_TDE_MAIN" "REPO_TDE_PACKAGING" "HOOK_DIR")
+if [[ "$USE_PREBUILD_EXTRA_DEPS" != "y" ]]; then
+	BASE_DIRS+=("REPO_EXTRA_DEPENDENCIES")
+fi
 for var_name in ${BASE_DIRS[@]}; do
   if [ ! -d "${!var_name}" ]; then
-    echo -e "$var_name directory missing. Value is \"${!var_name}\". Check your config or create it."
+    echo -e "${CYellow}$var_name${CNone} folder missing (${CLightPurple}${!var_name}${CNone}). Check your config or create it."
   	do_exit 4
   fi
 done
diff --git a/debian/_buildscripts/local/internals/_build_common.sh b/debian/_buildscripts/local/internals/_build_common.sh
index 5e4ba67fe..8b048a635 100755
--- a/debian/_buildscripts/local/internals/_build_common.sh
+++ b/debian/_buildscripts/local/internals/_build_common.sh
@@ -50,7 +50,7 @@ function echo_and_tee()
 }
 
 #----------------------------
-function _set_path_varables()
+function _set_path_variables()
 {
 	# Set useful path variables
 	set -a
@@ -91,7 +91,7 @@ function init_common()
 	CFG_FILE=$SCRIPT_DIR/_config.sh
 	if [ -f "$CFG_FILE" ]; then
 		. "$CFG_FILE"
-		_set_path_varables
+		_set_path_variables
 	else
 		echo -e "${CLightRed}  --- NOTE ---${CNone}"
 		echo -e "Creating TDE build configuration file from template as ${CLightPurple}$CFG_FILE${CNone}."
@@ -111,11 +111,16 @@ function init_common()
 	# -- Need to use a "here string" otherwise if the DISTRO_FOUND value is modified
 	# -- inside the while loop, this would not remember after the loop.
 	DISTRO_FOUND="n"
-	while read l_distro l_version l_name l_rel_suffix; do	
+	while read l_distro l_version l_name l_rel_suffix l_packaging_path; do
 		if [ "$l_distro" = "$DISTRO" -a "$l_name" = "$DISTRO_NAME" ]; then
 			DISTRO_FOUND="y"
+			l_rel_suffix=`echo "$l_rel_suffix" | perl -pe "s|^[\"']?(.*?)[\"']?$|\1|g"`
+			l_packaging_path=`echo "$l_packaging_path" | perl -pe "s|^[\"']?(.*?)[\"']?$|\1|g"`
 			export DISTRO_VERSION="$l_version"
 			export REL_SUFFIX="$l_rel_suffix"
+			if [[ ! -z "$l_packaging_path" ]]; then
+				REPO_TDE_PACKAGING="$TDE_DIR/$CFG_GIT_DIR/tde-packaging/$l_packaging_path"
+			fi
 			break
 		fi
 	done <<< $(cat $DISTS_FILE | grep -E "^(\s*[^#\s]+\s+[^\s]+.*)$")
@@ -163,6 +168,7 @@ function init_common()
 	
 	# Check branch configuration
 	# - branch existance
+	UPDATE_BRANCHES="${OVERRIDE_UPDATE_BRANCHES:-$UPDATE_BRANCHES}"
 	cd "$REPO_TDE"
 	BRANCHES=()
 	REMOTE_BRANCHES=(`git branch --remote | grep -v "HEAD" | sed "s|origin/||g"`)
diff --git a/debian/_buildscripts/local/internals/_config_template.sh b/debian/_buildscripts/local/internals/_config_template.sh
index be992d297..00d25e315 100644
--- a/debian/_buildscripts/local/internals/_config_template.sh
+++ b/debian/_buildscripts/local/internals/_config_template.sh
@@ -28,7 +28,7 @@ CFG_SCRIPT_LOG_DIR="0_logs"
 CFG_GIT_DIR="1_git"
 CFG_BUILD_DIR="2_build"
 CFG_REPO_DIR="3_repo"
-CFG_EXTRA_DEPS_DIR="edeps"			  # Relative to CFG_GIT_DIR folder
+CFG_EXTRA_DEPS_DIR="edeps"			  # Relative to CFG_GIT_DIR folder. Only required if USE_PREBUILD_EXTRA_DEPS != "y"
 CFG_HOOKS_DIR="hooks"     			  # Relative to CFG_GIT_DIR folder
 
 set +a
diff --git a/debian/_buildscripts/local/internals/distro_list.txt b/debian/_buildscripts/local/internals/distro_list.txt
index 0ca037eb0..9d2707e7b 100644
--- a/debian/_buildscripts/local/internals/distro_list.txt
+++ b/debian/_buildscripts/local/internals/distro_list.txt
@@ -1,31 +1,48 @@
 #!/bin/bash
 
 # List of supported distributions
+#
+# Format:
+#  distro name
+#  distro version number
+#  distro version name
+#  package suffix if required
+#  tde-packaging corresponding path if required
+#
 DISTROS="
-  debian     5.0    lenny    
-  debian     6.0    squeeze    
-  debian     7.0    wheezy    
-  debian     8.0    jessie    
-  debian     9.0    stretch    
-  debian    10.0    buster            ~a
-  debian    10.0    sid               ~b
-  raspbian   7.0    raspbian-wheezy  
-  raspbian   8.0    raspbian-jessie  
-  ubuntu    10.04   lucid    
-  ubuntu    10.10   maverick  
-  ubuntu    11.04   natty    
-  ubuntu    11.10   oneiric    
-  ubuntu    12.04   precise    
-  ubuntu    12.10   quantal    
-  ubuntu    13.04   raring    
-  ubuntu    13.10   saucy    
-  ubuntu    14.04   trusty    
-  ubuntu    14.10   utopic    
-  ubuntu    15.04   vivid    
-  ubuntu    15.10   wily    
-  ubuntu    16.04   xenial    
-  ubuntu    16.10   yakkety    
-  ubuntu    17.04   zesty    
-  ubuntu    17.10   artful    
-  ubuntu    18.04   bionic            ~a
+	# -- debian --
+  debian     5.0    lenny             ''  ''
+  debian     6.0    squeeze           ''  ''
+  debian     7.0    wheezy            ''  ''
+  debian     8.0    jessie            ''  ''
+  debian     9.0    stretch           ''  ''
+  debian    10.0    buster            ~a  ''
+  debian    11.0    sid               ~b  ''
+	# -- devuan --                                                 
+  devuan     1.0    jessie            ''  debian/jessie
+  devuan     2.0    ascii             ''  debian/stretch
+  devuan     3.0    beowulf           ~a  debian/buster
+  devuan     4.0    ceres             ~b  debian/sid
+	# -- raspbian --                                  
+  raspbian   7.0    raspbian-wheezy   ''  ''
+  raspbian   8.0    raspbian-jessie   ''  ''
+  raspbian   9.0    raspbian-stretch  ''  ''
+	# -- ubuntu --                      
+  ubuntu    10.04   lucid             ''  ''
+  ubuntu    10.10   maverick          ''  ''
+  ubuntu    11.04   natty             ''  ''
+  ubuntu    11.10   oneiric           ''  ''
+  ubuntu    12.04   precise           ''  ''
+  ubuntu    12.10   quantal           ''  ''
+  ubuntu    13.04   raring            ''  ''
+  ubuntu    13.10   saucy             ''  ''
+  ubuntu    14.04   trusty            ''  ''
+  ubuntu    14.10   utopic            ''  ''
+  ubuntu    15.04   vivid             ''  ''
+  ubuntu    15.10   wily              ''  ''
+  ubuntu    16.04   xenial            ''  ''
+  ubuntu    16.10   yakkety           ''  ''
+  ubuntu    17.04   zesty             ''  ''
+  ubuntu    17.10   artful            ''  ''
+  ubuntu    18.04   bionic            ~a  ''
 "
diff --git a/debian/_buildscripts/local/internals/extra_deps.txt b/debian/_buildscripts/local/internals/extra_deps.txt
index 12cd3b395..0a764d9bc 100644
--- a/debian/_buildscripts/local/internals/extra_deps.txt
+++ b/debian/_buildscripts/local/internals/extra_deps.txt
@@ -2,6 +2,8 @@
 
 # List of repositories for extra dependency packages
 EDEPS_REPO="
-	master   http://mirror.xcer.cz/trinity-tb  deps
-	r14.0.x  http://mirror.xcer.cz/trinity-sb  deps-r14
+# - For the time being use stable builds for extra dependencies
+#	master   http://mirror.ppa.trinitydesktop.org/trinity-testing deps
+	master   http://mirror.ppa.trinitydesktop.org/trinity-sb      deps-r14
+	r14.0.x  http://mirror.ppa.trinitydesktop.org/trinity-sb      deps-r14
 "
diff --git a/debian/_buildscripts/local/update_repositories.sh b/debian/_buildscripts/local/update_repositories.sh
index a9d2fef12..5c0f5aa45 100755
--- a/debian/_buildscripts/local/update_repositories.sh
+++ b/debian/_buildscripts/local/update_repositories.sh
@@ -1,5 +1,34 @@
 #!/bin/bash
 
+# Check command line arguments and set options
+# Run before loading configuration, to allow branch overriding
+bool_INCREMENTAL="n"
+bool_VERBOSE_LOG="n"
+bool_SWITCH_ONLY="n"
+OVERRIDE_DEFAULT_REPO_BRANCH=""
+for ((idx=1; idx<=$#; idx++)); do
+  arg="${!idx}"
+	if [ "$arg" = "-i" ]; then 		    		# continue from last updated module (Incremental)
+		bool_INCREMENTAL="y"
+	elif [ "$arg" = "-v" ]; then 		    	# display and log git command output (Verbose)
+		bool_VERBOSE_LOG="y"
+	elif [ "$arg" = "-ub" ]; then 	   		# branches to update (Update Branches)
+		((idx++))
+		OVERRIDE_UPDATE_BRANCHES="${!idx}"
+		[[ -z "$OVERRIDE_DEFAULT_REPO_BRANCH" ]] && OVERRIDE_DEFAULT_REPO_BRANCH="${!idx}"
+	elif [ "$arg" = "-db" ]; then 	    	# default branch after update (Default Branch)
+		((idx++))
+		if [[ "$bool_SWITCH_ONLY" != 'y' ]]; then
+		  # '-db' is only used if no '-so' argument is specified. If '-so <branch>'
+		  # is given, '-db <branch> is ignored
+			OVERRIDE_DEFAULT_REPO_BRANCH="${!idx}"
+		fi
+	elif [ "$arg" = "-so" ]; then 	   		# switch branch only (Switch Only)
+		bool_SWITCH_ONLY="y" && ((idx++))
+		OVERRIDE_DEFAULT_REPO_BRANCH="${!idx}"
+	fi
+done
+
 # Load common code
 . ./internals/_build_common.sh
 init_common
@@ -12,11 +41,13 @@ UPDATE_LOCK_FILENAME="/var/lock/TDE_update_repo_lock"  	# Lock file for incremen
 #  $1 - module folder
 #  $2 - operation type
 #  $3 - branch to update
+#  $4 - new branch flag (only for reporting)
 function _do_update()
 {
 	local MOD_PATH=$1
 	local OP_TYPE=$2
 	local BRANCH=$3
+	local NEW_BRANCH=$4
 	local RESULT=""
 	
 	case "$OP_TYPE" in 
@@ -29,17 +60,18 @@ function _do_update()
 						git reset --hard HEAD &>/dev/null
 						git clean -dxff &>/dev/null
 					fi
-					# Make sure the local branch exists and is a tracking branch
+					# Make sure the local branch exists
 					if [[ -z `git branch | grep -E "\b$BRANCH\b"` ]]; then
+					  NEW_BRANCH="y"
 						eval git checkout -b \"$BRANCH\" \"origin/$BRANCH\" $OPT_VERBOSE_LOG
 					else	
 						eval git checkout \"$BRANCH\" $OPT_VERBOSE_LOG
 					fi
-					if [[ ! -z `git branch -v | grep -E "^\*\s+$BRANCH"` ]]; then
-						if [[ -z `git branch -vv | grep "origin/$BRANCH"` ]]; then
-							git branch -u "origin/$BRANCH" &>/dev/null #$
-							git reset --hard "origin/$BRANCH" &>/dev/null
-						fi
+					# Make sure the local branch is a tracking branch
+					if [[ -z `git config branch."$BRANCH".remote` ]]; then
+						NEW_BRANCH="y"
+						git branch -u "origin/$BRANCH" &>/dev/null #$
+						git reset --hard "origin/$BRANCH" &>/dev/null
 					fi
 					# Update
 					eval git reset --hard HEAD $OPT_VERBOSE_LOG
@@ -53,7 +85,11 @@ function _do_update()
 							RESULT="${CLightRed}[  FAIL  ]"
 						fi
 					else
-						RESULT="[   OK   ]"
+						if [[ "$NEW_BRANCH" = "y" ]]; then
+							RESULT="${CLightGreen}[ UPDATE ]"
+						else
+							RESULT="[   OK   ]"
+						fi
 					fi
 				else
 					RESULT="${CLightRed}[  FAIL  ]"
@@ -67,6 +103,8 @@ function _do_update()
 		"switch-to")
 			cd "$MOD_PATH" &>/dev/null
 			eval git checkout \"$BRANCH\" $OPT_VERBOSE_LOG
+			eval git reset --hard HEAD $OPT_VERBOSE_LOG
+			eval git clean -dxff $OPT_VERBOSE_LOG
 			if [[ ! -z `git branch -v | grep -E "^\*\s+$BRANCH"` ]]; then
 				RESULT="[   OK   ]"
 			else
@@ -88,42 +126,37 @@ function _do_update()
 #  $1 - module folder
 #  $2 - operation type 
 #  $3 - branch to update
+#  $4 - new branch flag (only for reporting)
 function _update_module()
 {
 	local MOD_PATH=$1
 	local OP_TYPE=$2
 	local BRANCH=$3
+	
 	# Current module
 	_do_update "$@"
   # Submodules
+	local NEW_BRANCH="n"
   local SUBMOD_LIST="$MOD_PATH/.gitmodules"
 	if [[ -e "$SUBMOD_LIST" ]]; then
 		sed -n "s|^\[submodule \"\([^\"]*\)\"\]$|\1|p" <$SUBMOD_LIST |\
 		while read -r SUBMOD_PATH; do
+			NEW_BRANCH="n"
 			cd "$MOD_PATH" &>/dev/null
 			if [[ -z "`git config --get submodule.$SUBMOD_PATH.url`" ]]; then
+			  NEW_BRANCH="y"  # if a submodule is missing, need to report "update" status
 				eval git submodule init -- \"$SUBMOD_PATH\" $OPT_VERBOSE_LOG
 			fi
 			if [[ ! -e "$MOD_PATH/$SUBMOD_PATH/.git" ]]; then
+			  NEW_BRANCH="y"  # if a submodule is incomplete, need to report "update" status
 				eval git submodule update -- \"$SUBMOD_PATH\" $OPT_VERBOSE_LOG
 			fi
-			_update_module "$MOD_PATH/$SUBMOD_PATH" "$OP_TYPE" "$BRANCH"
+			_update_module "$MOD_PATH/$SUBMOD_PATH" "$OP_TYPE" "$BRANCH" "$NEW_BRANCH"
 		done
 	fi
 }
 
 #----------------------------
-# Check command line arguments and set options
-bool_INCREMENTAL="n"
-bool_VERBOSE_LOG="n"
-for arg in $@; do
-	if [ "$arg" = "-i" ]; then 		    		# continue from last updated module (Incremental)
-		bool_INCREMENTAL="y"
-	elif [ "$arg" = "-v" ]; then 		    	# display and log git command output
-		bool_VERBOSE_LOG="y"
-	fi
-done
-
 if [ "$bool_INCREMENTAL" = "y" ]; then
   [ ! -f "$UPDATE_LOCK_FILENAME" ] && bool_INCREMENTAL="n"
 else
@@ -151,22 +184,24 @@ if [ "$bool_INCREMENTAL" != "y" ]; then
 	echo "TDE repositories update started" > "$UPDATE_LOCK_FILENAME"
 fi
 
-# Branch update
 _LAST_BRANCH=""
-for branch in "${BRANCHES[@]}"; do
-  _LAST_BRANCH="$branch"
-	echo_and_tee "${CLightCyan}---------------------------------------${CNone}" "$LOG_UPDATE_REPO_FILENAME" "y"
-	echo_and_tee "${CLightCyan}        Updating branch ${CYellow}$branch        ${CNone}" "$LOG_UPDATE_REPO_FILENAME"
-	echo_and_tee "${CLightCyan}---------------------------------------${CNone}" "$LOG_UPDATE_REPO_FILENAME"
+if [[ "$bool_SWITCH_ONLY" != 'y' ]]; then
+	# Branch update
+	for branch in "${BRANCHES[@]}"; do
+		_LAST_BRANCH="$branch"
+		echo_and_tee "${CLightCyan}---------------------------------------${CNone}" "$LOG_UPDATE_REPO_FILENAME" "y"
+		echo_and_tee "${CLightCyan}        Updating branch ${CYellow}$branch        ${CNone}" "$LOG_UPDATE_REPO_FILENAME"
+		echo_and_tee "${CLightCyan}---------------------------------------${CNone}" "$LOG_UPDATE_REPO_FILENAME"
+			
+		# Update TDE main repository
+		_update_module "$REPO_TDE" "update" "$branch" "n"
 		
-	# Update TDE main repository
-	_update_module "$REPO_TDE" "update" "$branch"
-	
-	# Update TDE packaging repository
-	_update_module "$TDE_DIR/$CFG_GIT_DIR/tde-packaging" "update" "$branch"
+		# Update TDE packaging repository
+		_update_module "$TDE_DIR/$CFG_GIT_DIR/tde-packaging" "update" "$branch" "n"
 
-	echo_and_tee "" "$LOG_UPDATE_REPO_FILENAME"
-done
+		echo_and_tee "" "$LOG_UPDATE_REPO_FILENAME"
+	done
+fi
 
 # Switch to specified branch if necessary
 if [[ "$DEFAULT_REPO_BRANCH" != "$_LAST_BRANCH" ]]; then
@@ -175,10 +210,10 @@ if [[ "$DEFAULT_REPO_BRANCH" != "$_LAST_BRANCH" ]]; then
 	echo_and_tee "${CLightCyan}---------------------------------------${CNone}" "$LOG_UPDATE_REPO_FILENAME"
 		
 	# Switch TDE main repository
-	_update_module "$REPO_TDE" "switch-to" "$DEFAULT_REPO_BRANCH"
+	_update_module "$REPO_TDE" "switch-to" "$DEFAULT_REPO_BRANCH" "n"
 	
 	# Switch TDE packaging repository
-	_update_module "$TDE_DIR/$CFG_GIT_DIR/tde-packaging" "switch-to" "$DEFAULT_REPO_BRANCH"
+	_update_module "$TDE_DIR/$CFG_GIT_DIR/tde-packaging" "switch-to" "$DEFAULT_REPO_BRANCH" "n"
 
 	echo_and_tee "" "$LOG_UPDATE_REPO_FILENAME"
 fi