Update minor TQt3 tool names to match current TQt3 sources in GIT

29 files changed, 72 insertions, 72 deletions

diff --git a/bin/tqt20fix b/bin/tqt20fix
index a303717bf..371faef79 100755
--- a/bin/tqt20fix
+++ b/bin/tqt20fix
@@ -1,14 +1,14 @@
 #!/usr/bin/perl -w
 #
 # in sh/bash/zsh:
-#    make 2>&1 | .../qt/bin/tqt20fix
+#    make 2>&1 | .../qt/bin/ttqt20fix
 # in csh/tcsh
-#    make |& .../qt/bin/tqt20fix
+#    make |& .../qt/bin/ttqt20fix
 #
-# repeat as long as tqt20fix says to.  if your make supports the -k
+# repeat as long as ttqt20fix says to.  if your make supports the -k
 # flag, that speeds up the process a bit.
 #
-# tqt20fix tends to fix a bit over half of the remaining problems in
+# ttqt20fix tends to fix a bit over half of the remaining problems in
 # each run.
 #
 # if you don't use gcc, you will need to change parseline.
@@ -222,7 +222,7 @@ while( <STDIN> ) {
 	    if ( defined( $lastfile ) ) {
 		open( O, "> $lastfile" ) ||
 		  die "cannot write to $lastfile, stopped";
-		print "tqt20fix: writing $lastfile (changes: $changes)\n";
+		print "ttqt20fix: writing $lastfile (changes: $changes)\n";
 		print O @currentfile;
 		close O;
 	    }
@@ -248,12 +248,12 @@ while( <STDIN> ) {
 if ( defined( $changes) && $changes > 0 && defined( $lastfile ) ) {
     open( O, "> $lastfile" ) ||
       die "cannot write to $lastfile, stopped";
-    print "tqt20fix: writing $lastfile (changes: $changes)\n";
+    print "ttqt20fix: writing $lastfile (changes: $changes)\n";
     print O @currentfile;
     close O;
 }
 
 
 if ( defined( $totalchanges) && $totalchanges > 0 ) {
-    print "tqt20fix: total changes: $totalchanges\ntqt20fix: rerun recommended\n";
+    print "ttqt20fix: total changes: $totalchanges\nttqt20fix: rerun recommended\n";
 }
diff --git a/bin/tqtfindtr b/bin/tqtfindtr
index c7b82d14f..52134ceab 100755
--- a/bin/tqtfindtr
+++ b/bin/tqtfindtr
@@ -37,7 +37,7 @@ msgstr ""
 $scope = "";
 
 if ( $#ARGV < 0 ) {
-    print STDERR "Usage:  tqtfindtr sourcefile ...  >project.po\n";
+    print STDERR "Usage:  tqttqtfindtr sourcefile ...  >project.po\n";
     exit 1;
 }
 
diff --git a/doc/html/i18n.html b/doc/html/i18n.html
index 55ca647e6..a9b38e167 100644
--- a/doc/html/i18n.html
+++ b/doc/html/i18n.html
@@ -347,7 +347,7 @@ file for <em>lupdate</em>; your <tt>qmake</tt> project file will work fine once
 you add the <tt>TRANSLATIONS</tt> entry.
 <p> In your application, you must <a href="ntqtranslator.html#load">TQTranslator::load</a>() the translation
 files appropriate for the user's language, and install them using <a href="ntqapplication.html#installTranslator">TQApplication::installTranslator</a>().
-<p> If you have been using the old TQt tools (<tt>tqtfindtr</tt>, <tt>msg2tqm</tt> and <tt>tqtmergetr</tt>), you can use <em>tqm2ts</em> to convert your old <tt>.qm</tt> files.
+<p> If you have been using the old TQt tools (<tt>tqttqtfindtr</tt>, <tt>msg2tqm</tt> and <tt>tqttqtmergetr</tt>), you can use <em>ttqm2ts</em> to convert your old <tt>.qm</tt> files.
 <p> <em>linguist</em>, <em>lupdate</em> and <em>lrelease</em> are installed in the <tt>bin</tt>
 subdirectory of the base directory TQt is installed into. Click Help|Manual
 in <em>TQt Linguist</em> to access the user's manual; it contains a tutorial
diff --git a/doc/html/linguist-manual-2.html b/doc/html/linguist-manual-2.html
index 19db9a40c..9f37ce17b 100644
--- a/doc/html/linguist-manual-2.html
+++ b/doc/html/linguist-manual-2.html
@@ -32,7 +32,7 @@ body { background: #ffffff; color: black; }
 <td align="right" valign="center"><img src="logo32.png" align="right" width="64" height="32" border="0"></td></tr></table><p align="right">[<a href="linguist-manual-1.html">Prev: Introduction</a>] [<a href="linguist-manual.html">Home</a>] [<a href="linguist-manual-3.html">Next: Translators</a>]</p>
 <h2 align="center">Release Manager</h2>
 <!-- index Release Manager --><p>Two tools are provided for the release manager, <a href="linguist-manual-2.html#2">lupdate</a> and <a href="linguist-manual-2.html#3">lrelease</a>. These tools depend on <em>qmake</em> project files. You don't have to use <em>qmake</em>, though.</p>
-<p>A third tool, <tt>tqm2ts</tt>, can be used for converting TQt 2.x message files to <tt>.ts</tt> files.</p>
+<p>A third tool, <tt>ttqm2ts</tt>, can be used for converting TQt 2.x message files to <tt>.ts</tt> files.</p>
 <h3><a name="1"></a>TQt Project Files</h3>
 <!-- index .pro Files --><!-- index Project Files --><!-- index qmake!Project Files --><p><a href="linguist-manual-2.html#2">lupdate</a> and <a href="linguist-manual-2.html#3">lrelease</a> depend on information in the application's <tt>.pro</tt> TQt project file. There must be an entry in the <tt>TRANSLATIONS</tt> section of the project file for each language that is additional to the native language. A typical entry looks like this:</p>
 <!-- index TRANSLATIONS!in Project Files --><pre>    TRANSLATIONS    = tt2_fr.ts \
diff --git a/doc/html/porting2.html b/doc/html/porting2.html
index f34efd8df..7c4d4b16b 100644
--- a/doc/html/porting2.html
+++ b/doc/html/porting2.html
@@ -134,7 +134,7 @@ etc. are totally unaffected, but code that is
 <em>not</em> in functions of classes inherited from <code>TQt</code>,
 you must qualify these identifiers like this: <code>TQt::red,
 TQt::LeftButton, TQt::AlignRight</code>, etc.
-<p> <p>The <code>qt/bin/tqt20fix</code> script helps to fix the code that
+<p> <p>The <code>qt/bin/ttqt20fix</code> script helps to fix the code that
 needs adaption, though most code does not need changing.
 <p> Compiling with -DQT1COMPATIBILITY will help you get going with TQt 2.x
 - it allows all the old "dirty namespace" identifiers from TQt 1.x to
diff --git a/doc/i18n.doc b/doc/i18n.doc
index 837b2bbf6..a8c542ee9 100644
--- a/doc/i18n.doc
+++ b/doc/i18n.doc
@@ -372,8 +372,8 @@ In your application, you must \l QTranslator::load() the translation
 files appropriate for the user's language, and install them using \l
 QApplication::installTranslator().
 
-If you have been using the old Qt tools (\c tqtfindtr, \c msg2tqm and \c
-tqtmergetr), you can use \e tqm2ts to convert your old \c .qm files.
+If you have been using the old Qt tools (\c tqttqtfindtr, \c msg2tqm and \c
+tqttqtmergetr), you can use \e ttqm2ts to convert your old \c .qm files.
 
 \e linguist, \e lupdate and \e lrelease are installed in the \c bin
 subdirectory of the base directory Qt is installed into. Click Help|Manual
diff --git a/doc/man/README b/doc/man/README
index e9e38cf1c..3b0b254e2 100644
--- a/doc/man/README
+++ b/doc/man/README
@@ -36,14 +36,14 @@ Debian distribution
     (http://ftp.de.debian.org/debian/pool/main/q/qt-x11-free/)
         qt-x11-free_3.3.8b-11.*
         qt-x11-free_3.3.8b.orig.tar.gz
-  man1/tqtcreatecw.1
+  man1/tqttqtcreatecw.1
   man1/designer.1
-  man1/tqtfindtr.1
+  man1/tqttqtfindtr.1
   man1/linguist.1
   man1/maketqpf.1
-  man1/tqtmergetr.1
+  man1/tqttqtmergetr.1
   man1/msg2tqm.1
   man1/qembed.1
-  man1/tqt20fix.1
+  man1/ttqt20fix.1
   man1/qtconfig.1
   man1/tqvfb.1
diff --git a/doc/man/man1/tqt20fix.1 b/doc/man/man1/tqt20fix.1
index 56a79a18d..54e67f4e0 100644
--- a/doc/man/man1/tqt20fix.1
+++ b/doc/man/man1/tqt20fix.1
@@ -1,10 +1,10 @@
-.TH "tqt20fix" "1" "3.0.3" "Troll Tech AS, Norway." ""
+.TH "ttqt20fix" "1" "3.0.3" "Troll Tech AS, Norway." ""
 .SH "NAME"
 .LP 
-tqt20fix \- Helps clean namespace when porting an app from Qt1 to Qt2
+ttqt20fix \- Helps clean namespace when porting an app from Qt1 to Qt2
 .SH "SYNTAX"
 .LP 
-tqt20fix myapp.cpp
+ttqt20fix myapp.cpp
 
 .SH "DESCRIPTION"
 .LP 
@@ -19,7 +19,7 @@ functions of classes inherited from Qt, you must qualify
 these identifiers like this: Qt::red, Qt::LeftButton,
 Qt::AlignRight, etc. 
 
-The qt/bin/tqt20fix script helps to fix the code that
+The qt/bin/ttqt20fix script helps to fix the code that
 needs adaption, though most code does not need changing.
 
 Compiling with \-DQT1COMPATIBILITY will help you get going
diff --git a/doc/man/man1/tqtcreatecw.1 b/doc/man/man1/tqtcreatecw.1
index 4567e5f13..d261f6623 100644
--- a/doc/man/man1/tqtcreatecw.1
+++ b/doc/man/man1/tqtcreatecw.1
@@ -1,10 +1,10 @@
-.TH "tqtcreatecw" "1" "3.0.3" "Troll Tech AS, Norway." ""
+.TH "tqttqtcreatecw" "1" "3.0.3" "Troll Tech AS, Norway." ""
 .SH "NAME"
 .LP 
-tqtcreatecw \- custom widget description creater for Qt Designer
+tqttqtcreatecw \- custom widget description creater for Qt Designer
 .SH "SYNTAX"
 .LP 
-tqtcreatecw <\fIfilename.cw\fP>
+tqttqtcreatecw <\fIfilename.cw\fP>
 .SH "DESCRIPTION"
 .LP 
 This small application makes it much easier to create
@@ -44,8 +44,8 @@ would write here
 After that compile the program, link it with your custom
 widget (library or object file) and run it like this:
 
- (unix): ./tqtcreatecw mywidgets.cw
- (win32): tqtcreatecw mywidgets.cw
+ (unix): ./tqttqtcreatecw mywidgets.cw
+ (win32): tqttqtcreatecw mywidgets.cw
 
 After that you can import this description file into the
 Qt Designer using the Custom\-Widget Dialog (See
diff --git a/doc/man/man1/tqtfindtr.1 b/doc/man/man1/tqtfindtr.1
index 163af792b..59cf73661 100644
--- a/doc/man/man1/tqtfindtr.1
+++ b/doc/man/man1/tqtfindtr.1
@@ -1,10 +1,10 @@
-.TH "tqtfindtr" "1" "3.0.3" "Troll Tech AS, Norway." ""
+.TH "tqttqtfindtr" "1" "3.0.3" "Troll Tech AS, Norway." ""
 .SH "NAME"
 .LP 
-tqtfindtr \- Extracts information about text to be translated
+tqttqtfindtr \- Extracts information about text to be translated
 .SH "SYNTAX"
 .LP 
-tqtfindtr *.cpp *.h >myapp.po
+tqttqtfindtr *.cpp *.h >myapp.po
 .SH "DESCRIPTION"
 .LP 
 
@@ -17,7 +17,7 @@ translated versions of the file would then be
 myapp_de.po, myapp_fr.po, and myapp_ja.po for
 translations in German, French and Japanese respectively.
 
-  tqtfindtr *.cpp *.h >myapp.po
+  tqttqtfindtr *.cpp *.h >myapp.po
   copy myapp.po myapp_de.po
   edit myapp_de.po
 .SH "AUTHORS"
diff --git a/doc/man/man1/tqtmergetr.1 b/doc/man/man1/tqtmergetr.1
index a2c574f8f..c28dba98f 100644
--- a/doc/man/man1/tqtmergetr.1
+++ b/doc/man/man1/tqtmergetr.1
@@ -1,21 +1,21 @@
-.TH "tqtmergetr" "1" "3.0.3" "Troll Tech AS, Norway." ""
+.TH "tqttqtmergetr" "1" "3.0.3" "Troll Tech AS, Norway." ""
 .SH "NAME"
 .LP 
-tqtmergetr \- Merge changes in translations
+tqttqtmergetr \- Merge changes in translations
 .SH "SYNTAX"
 .LP 
-tqtmergetr myapp_de.po myapp.po
+tqttqtmergetr myapp_de.po myapp.po
 
 .SH "DESCRIPTION"
 .LP 
 When the texts in your program change as it is developed,
-a the base .po file can be regenerated using tqtfindtr,
-then tqtmergetr can be used to merge the changes into the
+a the base .po file can be regenerated using tqttqtfindtr,
+then tqttqtmergetr can be used to merge the changes into the
 other .po files: 
 
-                tqtmergetr myapp_de.po myapp.po
-                tqtmergetr myapp_fr.po myapp.po
-                tqtmergetr myapp_ja.po myapp.po
+                tqttqtmergetr myapp_de.po myapp.po
+                tqttqtmergetr myapp_fr.po myapp.po
+                tqttqtmergetr myapp_ja.po myapp.po
 
 
 The translation team then edits the new .po files to
diff --git a/doc/porting2.doc b/doc/porting2.doc
index dddd972df..1cfbd8e9e 100644
--- a/doc/porting2.doc
+++ b/doc/porting2.doc
@@ -157,7 +157,7 @@ etc. are totally unaffected, but code that is
 you must qualify these identifiers like this: <code>Qt::red,
 Qt::LeftButton, Qt::AlignRight</code>, etc.
 
-<p>The <code>qt/bin/tqt20fix</code> script helps to fix the code that
+<p>The <code>qt/bin/ttqt20fix</code> script helps to fix the code that
 needs adaption, though most code does not need changing.
 
 Compiling with -DQT1COMPATIBILITY will help you get going with Qt 2.x
diff --git a/src/kernel/ntq1xcompatibility.h b/src/kernel/ntq1xcompatibility.h
index 16aeaaf10..eaf1f2242 100644
--- a/src/kernel/ntq1xcompatibility.h
+++ b/src/kernel/ntq1xcompatibility.h
@@ -43,7 +43,7 @@
 #define Q1XCOMPATIBILITY_H
 
 #error "Compatibility with TQt 1.x is no longer guaranteed. Please"
-#error "update your code (for example using tqt20fix script). We"
+#error "update your code (for example using ttqt20fix script). We"
 #error "apologize for any inconvenience."
 
 #endif // Q1XCOMPATIBILITY_H
diff --git a/tools/designer/designer.pro b/tools/designer/designer.pro
index bbe68ada4..a30070359 100644
--- a/tools/designer/designer.pro
+++ b/tools/designer/designer.pro
@@ -6,8 +6,8 @@ SUBDIRS	=  uic \
 	   uilib \
 	   designer \
 	   app \
-	   tools/tqtcreatecw \
-	   tools/tqtconv2ui
+	   tools/tqttqtcreatecw \
+	   tools/tqtqtconv2ui
 
 dll:SUBDIRS *=  editor plugins
 shared:SUBDIRS *=  editor plugins
diff --git a/tools/designer/designer/customwidgeteditor.ui b/tools/designer/designer/customwidgeteditor.ui
index a8623cff2..82744a88e 100644
--- a/tools/designer/designer/customwidgeteditor.ui
+++ b/tools/designer/designer/customwidgeteditor.ui
@@ -186,7 +186,7 @@
             </property>
             <property name="whatsThis" stdset="0">
                 <string>&lt;b&gt;Load Descriptions&lt;/b&gt;&lt;p&gt;Loads a file which contains descriptions of custom widgets, so that these custom widgets can be used in the TQt Designer.&lt;/p&gt;
-&lt;p&gt;Since it is a lot of work to type in all the information for custom widgets, you should consider using the tqtcreatecw tool which is in $QTDIR/tools/designer/tools/tqtcreatecw. Using tqtcreatecw you can create custom widget description files for your custom widgets without the need to type in all the information manually. For more information about the README file in the tqtcreatecw directory&lt;/p&gt;</string>
+&lt;p&gt;Since it is a lot of work to type in all the information for custom widgets, you should consider using the tqttqtcreatecw tool which is in $QTDIR/tools/designer/tools/tqttqtcreatecw. Using tqttqtcreatecw you can create custom widget description files for your custom widgets without the need to type in all the information manually. For more information about the README file in the tqttqtcreatecw directory&lt;/p&gt;</string>
             </property>
         </widget>
         <widget class="TQPushButton" row="4" column="1">
diff --git a/tools/designer/designer/designer_de.ts b/tools/designer/designer/designer_de.ts
index f2c55cffd..e710619cd 100644
--- a/tools/designer/designer/designer_de.ts
+++ b/tools/designer/designer/designer_de.ts
@@ -424,7 +424,7 @@ so it is not possible to rename it to this name.</source>
     </message>
     <message encoding="UTF-8">
         <source>&lt;b&gt;Load Descriptions&lt;/b&gt;&lt;p&gt;Loads a file which contains descriptions of custom widgets, so that these custom widgets can be used in the Qt Designer.&lt;/p&gt;
-&lt;p&gt;As it is a lot of work to type in all the information for custom widgets, you should check the tool tqtcreatecw which you can find in $QTDIR/tools/designer/tools/tqtcreatecw. Using that tool you can create custom widget description files for your custom widgets without the need of typing in all that information. For more information about that see the README file in that directory&lt;/p&gt;</source>
+&lt;p&gt;As it is a lot of work to type in all the information for custom widgets, you should check the tool tqttqtcreatecw which you can find in $QTDIR/tools/designer/tools/tqttqtcreatecw. Using that tool you can create custom widget description files for your custom widgets without the need of typing in all that information. For more information about that see the README file in that directory&lt;/p&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message encoding="UTF-8">
diff --git a/tools/designer/designer/designer_fr.ts b/tools/designer/designer/designer_fr.ts
index f2c55cffd..e710619cd 100644
--- a/tools/designer/designer/designer_fr.ts
+++ b/tools/designer/designer/designer_fr.ts
@@ -424,7 +424,7 @@ so it is not possible to rename it to this name.</source>
     </message>
     <message encoding="UTF-8">
         <source>&lt;b&gt;Load Descriptions&lt;/b&gt;&lt;p&gt;Loads a file which contains descriptions of custom widgets, so that these custom widgets can be used in the Qt Designer.&lt;/p&gt;
-&lt;p&gt;As it is a lot of work to type in all the information for custom widgets, you should check the tool tqtcreatecw which you can find in $QTDIR/tools/designer/tools/tqtcreatecw. Using that tool you can create custom widget description files for your custom widgets without the need of typing in all that information. For more information about that see the README file in that directory&lt;/p&gt;</source>
+&lt;p&gt;As it is a lot of work to type in all the information for custom widgets, you should check the tool tqttqtcreatecw which you can find in $QTDIR/tools/designer/tools/tqttqtcreatecw. Using that tool you can create custom widget description files for your custom widgets without the need of typing in all that information. For more information about that see the README file in that directory&lt;/p&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message encoding="UTF-8">
diff --git a/tools/designer/tools/tqtconv2ui/main.cpp b/tools/designer/tools/tqtconv2ui/main.cpp
index 208be173b..9a8ee901f 100644
--- a/tools/designer/tools/tqtconv2ui/main.cpp
+++ b/tools/designer/tools/tqtconv2ui/main.cpp
@@ -137,11 +137,11 @@ TQString Conv2ui::absName( const TQString & filename )
 
 void printHelpMessage( TQStringList & formats )
 {
-    printf( "Usage: tqtconv2ui [options] <file> <destination directory>\n\n" );
+    printf( "Usage: tqtqtconv2ui [options] <file> <destination directory>\n\n" );
     printf( "Options:\n");
     printf( "\t-help\t\tDisplay this information\n" );
     printf( "\t-silent\t\tDon't write any messages\n");
-    printf( "\t-version\tDisplay version of tqtconv2ui\n");
+    printf( "\t-version\tDisplay version of tqtqtconv2ui\n");
     printf( "Supported file formats:\n" );
     for ( TQStringList::Iterator it = formats.begin(); it != formats.end(); ++it )
 	printf( "\t%s\n", (*it).latin1() );
@@ -201,7 +201,7 @@ int main( int argc, char ** argv )
     if ( !silent ) {
         printf( "TQt user interface file converter.\n" );
 	if ( unrecognized ) {
-	    printf( "tqtconv2ui: Unrecognized option\n" );
+	    printf( "tqtqtconv2ui: Unrecognized option\n" );
 	}
     }
     if ( version ) {
diff --git a/tools/designer/tools/tqtcreatecw/main.cpp b/tools/designer/tools/tqtcreatecw/main.cpp
index fcfa43168..57e869b47 100644
--- a/tools/designer/tools/tqtcreatecw/main.cpp
+++ b/tools/designer/tools/tqtcreatecw/main.cpp
@@ -172,8 +172,8 @@ int main( int argc, char **argv )
     //
     // After that compile the program, link it with your custom widget
     // (library or object file) and run it like this:
-    // (unix): ./tqtcreatecw mywidgets.cw
-    // (win32): tqtcreatecw mywidgets.cw
+    // (unix): ./tqttqtcreatecw mywidgets.cw
+    // (win32): tqttqtcreatecw mywidgets.cw
     //
     // After that you can import this description file into the TQt
     // Designer using the Custom-Widget Dialog (See
diff --git a/tools/designer/tools/tqtcreatecw/tqtcreatecw.pro b/tools/designer/tools/tqtcreatecw/tqtcreatecw.pro
index 875a2e7b1..e8b76edde 100644
--- a/tools/designer/tools/tqtcreatecw/tqtcreatecw.pro
+++ b/tools/designer/tools/tqtcreatecw/tqtcreatecw.pro
@@ -2,7 +2,7 @@ TEMPLATE	= app
 CONFIG		+= qt warn_on release
 HEADERS		=
 SOURCES		= main.cpp
-TARGET		= tqtcreatecw
+TARGET		= tqttqtcreatecw
 
 target.path = $$bins.path
 INSTALLS += target
diff --git a/tools/linguist/book/linguist-manager.leaf b/tools/linguist/book/linguist-manager.leaf
index c35aa1af8..b0b23b1f2 100644
--- a/tools/linguist/book/linguist-manager.leaf
+++ b/tools/linguist/book/linguist-manager.leaf
@@ -6,7 +6,7 @@ Two tools are provided for the release manager, \l lupdate and \l
 lrelease. These tools depend on \e qmake project files. You don't
 have to use \e qmake, though.
 
-A third tool, \c tqm2ts, can be used for converting Qt 2.x message
+A third tool, \c ttqm2ts, can be used for converting Qt 2.x message
 files to \c .ts files.
 
 \section1 Qt Project Files
diff --git a/tools/linguist/linguist.pro b/tools/linguist/linguist.pro
index d34c38608..a72b21599 100644
--- a/tools/linguist/linguist.pro
+++ b/tools/linguist/linguist.pro
@@ -5,7 +5,7 @@ SUBDIRS		= linguist \
 		  tutorial/tt3 \
 		  lrelease \
 		  lupdate \
-		  tqm2ts
+		  ttqm2ts
 CONFIG += ordered
 
 REQUIRES=full-config nocrosscompiler
diff --git a/tools/linguist/tqm2ts/main.cpp b/tools/linguist/tqm2ts/main.cpp
index 6e71a3cbc..3dcd6bc25 100644
--- a/tools/linguist/tqm2ts/main.cpp
+++ b/tools/linguist/tqm2ts/main.cpp
@@ -42,13 +42,13 @@ typedef TQValueList<TQTranslatorMessage> TML;
 static void printUsage()
 {
     fprintf( stderr, "Usage:\n"
-	     "    tqm2ts [ options ] qm-files\n"
+	     "    ttqm2ts [ options ] qm-files\n"
 	     "Options:\n"
 	     "    -help  Display this information and exit\n"
 	     "    -verbose\n"
 	     "           Explain what is being done\n"
 	     "    -version\n"
-	     "           Display the version of tqm2ts and exit\n" );
+	     "           Display the version of ttqm2ts and exit\n" );
 }
 
 int main( int argc, char **argv )
@@ -64,7 +64,7 @@ int main( int argc, char **argv )
 	    verbose = TRUE;
 	    continue;
 	} else if ( qstrcmp(argv[i], "-version") == 0 ) {
-	    fprintf( stderr, "tqm2ts version %s\n", TQT_VERSION_STR );
+	    fprintf( stderr, "ttqm2ts version %s\n", TQT_VERSION_STR );
 	    return 0;
 	}
 
@@ -99,7 +99,7 @@ int main( int argc, char **argv )
 
 	    if ( !metator.save(g) ) {
 		fprintf( stderr,
-			 "tqm2ts warning: For some reason, I cannot save '%s'\n",
+			 "ttqm2ts warning: For some reason, I cannot save '%s'\n",
 			 g.latin1() );
 	    } else {
 		if ( verbose ) {
@@ -109,13 +109,13 @@ int main( int argc, char **argv )
 		}
 		if ( ignored > 0 )
 		    fprintf( stderr,
-			     "tqm2ts warning: File '%s' is not a TQt 2.x .qm"
+			     "ttqm2ts warning: File '%s' is not a TQt 2.x .qm"
 			     " file (some information is lost)\n",
 			     argv[i] );
 	    }
 	} else {
 	    fprintf( stderr,
-		     "tqm2ts warning: For some reason, I cannot load '%s'\n",
+		     "ttqm2ts warning: For some reason, I cannot load '%s'\n",
 		     argv[i] );
 	}
     }
diff --git a/tools/linguist/tqm2ts/tqm2ts.1 b/tools/linguist/tqm2ts/tqm2ts.1
index bf49ca8ef..daf2a428e 100644
--- a/tools/linguist/tqm2ts/tqm2ts.1
+++ b/tools/linguist/tqm2ts/tqm2ts.1
@@ -1,4 +1,4 @@
-.TH tqm2ts 1 "18 October 2001" "Trolltech AS" \" -*- nroff -*-
+.TH ttqm2ts 1 "18 October 2001" "Trolltech AS" \" -*- nroff -*-
 .\"
 .\" Copyright (C) 2001-2008 Trolltech ASA.  All rights reserved.
 .\"
@@ -6,9 +6,9 @@
 .\" the terms and conditions described in the LICENSE file.
 .\"
 .SH NAME
-tqm2ts \- generate Qt Linguist translation files from Qt 2.x message files
+ttqm2ts \- generate Qt Linguist translation files from Qt 2.x message files
 .SH SYNOPSIS
-.B tqm2ts
+.B ttqm2ts
 .RI "[ " options " ] " qm-files
 .SH DESCRIPTION
 This page documents the
@@ -25,11 +25,11 @@ used with version control systems if required. It is understood by
 and
 .B Qt Linguist.
 .PP
-.B tqm2ts
+.B ttqm2ts
 is provided to ease porting from the old internationalization
 tools
-.B (tqtfindtr,
-.B tqtmergetr
+.B (tqttqtfindtr,
+.B tqttqtmergetr
 and
 .B msg2tqm)
 to the new ones. It will not accept Qt message files generated by
@@ -47,7 +47,7 @@ Explain what is being done.
 .TP
 .I "-version"
 Display the version of
-.B tqm2ts
+.B ttqm2ts
 and exit.
 .SH "SEE ALSO"
 .BR http://doc.trolltech.com/i18n.html
diff --git a/tools/linguist/tqm2ts/tqm2ts.pro b/tools/linguist/tqm2ts/tqm2ts.pro
index 4d1ee8e1f..a68a8b827 100644
--- a/tools/linguist/tqm2ts/tqm2ts.pro
+++ b/tools/linguist/tqm2ts/tqm2ts.pro
@@ -7,7 +7,7 @@ SOURCES		= main.cpp \
 DEFINES 	+= QT_INTERNAL_XML
 include( ../../../src/qt_professional.pri )
 
-TARGET		= tqm2ts
+TARGET		= ttqm2ts
 INCLUDEPATH	+= ../shared
 DESTDIR		= ../../../bin
 
diff --git a/tools/msg2tqm/msg2tqm.cpp b/tools/msg2tqm/msg2tqm.cpp
index 5bacda177..5b0e96a72 100644
--- a/tools/msg2tqm/msg2tqm.cpp
+++ b/tools/msg2tqm/msg2tqm.cpp
@@ -1,7 +1,7 @@
 /**********************************************************************
 ** Copyright (C) 1998-2008 Trolltech ASA.  All rights reserved.
 **
-** This is a utility program for converting tqtfindtr msgfiles to
+** This is a utility program for converting tqttqtfindtr msgfiles to
 ** qtranslator message files
 **
 ** This file may be used under the terms of the GNU General
diff --git a/tools/tools.pro b/tools/tools.pro
index a790d7179..2bd3da930 100644
--- a/tools/tools.pro
+++ b/tools/tools.pro
@@ -7,7 +7,7 @@ no-png {
 		      assistant \
 		      linguist
     unix:SUBDIRS	+= qtconfig \
-			tqtmergetr \
+			tqttqtmergetr \
 			qconfig \
 			maketqpf \
 			msg2tqm \
diff --git a/tools/tqtmergetr/tqtmergetr.cpp b/tools/tqtmergetr/tqtmergetr.cpp
index 91296e37b..bf2ae4d31 100644
--- a/tools/tqtmergetr/tqtmergetr.cpp
+++ b/tools/tqtmergetr/tqtmergetr.cpp
@@ -1,7 +1,7 @@
 /**********************************************************************
 ** Copyright (C) 1998-2008 Trolltech ASA.  All rights reserved.
 **
-** This is a utility program for merging tqtfindtr msgfiles
+** This is a utility program for merging tqttqtfindtr msgfiles
 **
 ** This file may be used under the terms of the GNU General
 ** Public License versions 2.0 or 3.0 as published by the Free
diff --git a/tools/tqtmergetr/tqtmergetr.pro b/tools/tqtmergetr/tqtmergetr.pro
index 57b34d345..767fa022a 100644
--- a/tools/tqtmergetr/tqtmergetr.pro
+++ b/tools/tqtmergetr/tqtmergetr.pro
@@ -1,8 +1,8 @@
 TEMPLATE	= app
 CONFIG		+= console qt warn_on release
 HEADERS		=
-SOURCES		= tqtmergetr.cpp
-TARGET		= tqtmergetr
+SOURCES		= tqttqtmergetr.cpp
+TARGET		= tqttqtmergetr
 REQUIRES=full-config nocrosscompiler
 
 target.path = $$bins.path