Rename graphics class nt* related files to equivalent tq* (part 2)

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

1 files changed, 383 insertions, 0 deletions

diff --git a/src/kernel/tqregion.cpp b/src/kernel/tqregion.cpp
new file mode 100644
index 000000000..c15811ebd
--- /dev/null
+++ b/src/kernel/tqregion.cpp
@@ -0,0 +1,383 @@
+/****************************************************************************
+**
+** Implementation of TQRegion class
+**
+** Created : 950726
+**
+** Copyright (C) 1992-2008 Trolltech ASA.  All rights reserved.
+**
+** This file is part of the kernel module of the TQt GUI Toolkit.
+**
+** This file may be used under the terms of the GNU General
+** Public License versions 2.0 or 3.0 as published by the Free
+** Software Foundation and appearing in the files LICENSE.GPL2
+** and LICENSE.GPL3 included in the packaging of this file.
+** Alternatively you may (at your option) use any later version
+** of the GNU General Public License if such license has been
+** publicly approved by Trolltech ASA (or its successors, if any)
+** and the KDE Free TQt Foundation.
+**
+** Please review the following information to ensure GNU General
+** Public Licensing requirements will be met:
+** http://trolltech.com/products/qt/licenses/licensing/opensource/.
+** If you are unsure which license is appropriate for your use, please
+** review the following information:
+** http://trolltech.com/products/qt/licenses/licensing/licensingoverview
+** or contact the sales department at sales@trolltech.com.
+**
+** This file may be used under the terms of the Q Public License as
+** defined by Trolltech ASA and appearing in the file LICENSE.TQPL
+** included in the packaging of this file.  Licensees holding valid TQt
+** Commercial licenses may use this file in accordance with the TQt
+** Commercial License Agreement provided with the Software.
+**
+** This file is provided "AS IS" with NO WARRANTY OF ANY KIND,
+** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted
+** herein.
+**
+**********************************************************************/
+
+#include "tqregion.h"
+#include "tqpointarray.h"
+#include "tqbuffer.h"
+#include "tqdatastream.h"
+
+// BEING REVISED: paul
+/*!
+    \class TQRegion tqregion.h
+    \brief The TQRegion class specifies a clip region for a painter.
+
+    \ingroup images
+    \ingroup graphics
+
+    TQRegion is used with TQPainter::setClipRegion() to limit the paint
+    area to what needs to be painted. There is also a
+    TQWidget::repaint() that takes a TQRegion parameter. TQRegion is the
+    best tool for reducing flicker.
+
+    A region can be created from a rectangle, an ellipse, a polygon or
+    a bitmap. Complex regions may be created by combining simple
+    regions using unite(), intersect(), subtract() or eor() (exclusive
+    or). You can move a region using translate().
+
+    You can test whether a region isNull(), isEmpty() or if it
+    contains() a TQPoint or TQRect. The bounding rectangle is given by
+    boundingRect().
+
+    The function rects() gives a decomposition of the region into
+    rectangles.
+
+    Example of using complex regions:
+    \code
+	void MyWidget::paintEvent( TQPaintEvent * )
+	{
+	    TQPainter p;                         // our painter
+	    TQRegion r1( TQRect(100,100,200,80),  // r1 = elliptic region
+			TQRegion::Ellipse );
+	    TQRegion r2( TQRect(100,120,90,30) ); // r2 = rectangular region
+	    TQRegion r3 = r1.intersect( r2 );    // r3 = intersection
+	    p.begin( this );                    // start painting widget
+	    p.setClipRegion( r3 );              // set clip region
+	    ...                                 // paint clipped graphics
+	    p.end();                            // painting done
+	}
+    \endcode
+
+    TQRegion is an \link shclass.html implicitly shared\endlink class.
+
+    \warning Due to window system limitations, the whole coordinate
+    space for a region is limited to the points between -32767 and
+    32767 on Mac OS X and Windows 95/98/ME.
+
+    \sa TQPainter::setClipRegion(), TQPainter::setClipRect()
+*/
+
+
+/*!
+    \enum TQRegion::RegionType
+
+    Specifies the shape of the region to be created.
+
+    \value Rectangle  the region covers the entire rectangle.
+    \value Ellipse  the region is an ellipse inside the rectangle.
+*/
+
+/*!
+    \fn Region  TQRegion::handle() const
+
+    Returns the region's handle.
+*/
+
+/*****************************************************************************
+  TQRegion member functions
+ *****************************************************************************/
+
+/*!
+    Constructs a rectangular or elliptic region.
+
+    If \a t is \c Rectangle, the region is the filled rectangle (\a x,
+    \a y, \a w, \a h). If \a t is \c Ellipse, the region is the filled
+    ellipse with center at (\a x + \a w / 2, \a y + \a h / 2) and size
+    (\a w ,\a h ).
+*/
+TQRegion::TQRegion( int x, int y, int w, int h, RegionType t )
+{
+    TQRegion tmp(TQRect(x,y,w,h),t);
+    tmp.data->ref();
+    data = tmp.data;
+}
+
+/*!
+    Detaches from shared region data to make sure that this region is
+    the only one referring to the data.
+
+    \sa copy(), \link shclass.html shared classes\endlink
+*/
+
+void TQRegion::detach()
+{
+    if ( data->count != 1 )
+	*this = copy();
+}
+
+#ifndef TQT_NO_DATASTREAM
+/*
+    Executes region commands in the internal buffer and rebuilds the
+    original region.
+
+    We do this when we read a region from the data stream.
+
+    If \a ver is non-0, uses the format version \a ver on reading the
+    byte array.
+*/
+
+void TQRegion::exec( const TQByteArray &buffer, int ver )
+{
+    TQBuffer buf( buffer );
+    TQDataStream s( &buf );
+    if ( ver )
+	s.setVersion( ver );
+    buf.open( IO_ReadOnly );
+    TQRegion rgn;
+#if defined(QT_CHECK_STATE)
+    int test_cnt = 0;
+#endif
+    while ( !s.eof() ) {
+	TQ_INT32 id;
+	if ( s.version() == 1 ) {
+	    int id_int;
+	    s >> id_int;
+	    id = id_int;
+	} else {
+	    s >> id;
+	}
+#if defined(QT_CHECK_STATE)
+	if ( test_cnt > 0 && id != TQRGN_TRANSLATE )
+	    tqWarning( "TQRegion::exec: Internal error" );
+	test_cnt++;
+#endif
+	if ( id == TQRGN_SETRECT || id == TQRGN_SETELLIPSE ) {
+	    TQRect r;
+	    s >> r;
+	    rgn = TQRegion( r, id == TQRGN_SETRECT ? Rectangle : Ellipse );
+	} else if ( id == TQRGN_SETPTARRAY_ALT || id == TQRGN_SETPTARRAY_WIND ) {
+	    TQPointArray a;
+	    s >> a;
+	    rgn = TQRegion( a, id == TQRGN_SETPTARRAY_WIND );
+	} else if ( id == TQRGN_TRANSLATE ) {
+	    TQPoint p;
+	    s >> p;
+	    rgn.translate( p.x(), p.y() );
+	} else if ( id >= TQRGN_OR && id <= TQRGN_XOR ) {
+	    TQByteArray bop1, bop2;
+	    TQRegion r1, r2;
+	    s >> bop1;	r1.exec( bop1 );
+	    s >> bop2;	r2.exec( bop2 );
+	    switch ( id ) {
+		case TQRGN_OR:
+		    rgn = r1.unite( r2 );
+		    break;
+		case TQRGN_AND:
+		    rgn = r1.intersect( r2 );
+		    break;
+		case TQRGN_SUB:
+		    rgn = r1.subtract( r2 );
+		    break;
+		case TQRGN_XOR:
+		    rgn = r1.eor( r2 );
+		    break;
+	    }
+	} else if ( id == TQRGN_RECTS ) {
+	    // (This is the only form used in TQt 2.0)
+	    TQ_UINT32 n;
+	    s >> n;
+	    TQRect r;
+	    for ( int i=0; i<(int)n; i++ ) {
+		s >> r;
+		rgn = rgn.unite( TQRegion(r) );
+	    }
+	}
+    }
+    buf.close();
+    *this = rgn;
+}
+
+
+/*****************************************************************************
+  TQRegion stream functions
+ *****************************************************************************/
+
+/*!
+    \relates TQRegion
+
+    Writes the region \a r to the stream \a s and returns a reference
+    to the stream.
+
+    \sa \link datastreamformat.html Format of the TQDataStream operators \endlink
+*/
+
+TQDataStream &operator<<( TQDataStream &s, const TQRegion &r )
+{
+    TQMemArray<TQRect> a = r.rects();
+    if ( a.isEmpty() ) {
+	s << (TQ_UINT32)0;
+    } else {
+	if ( s.version() == 1 ) {
+	    int i;
+	    for ( i=(int)a.size()-1; i>0; i-- ) {
+		s << (TQ_UINT32)(12+i*24);
+		s << (int)TQRGN_OR;
+	    }
+	    for ( i=0; i<(int)a.size(); i++ ) {
+		s << (TQ_UINT32)(4+8) << (int)TQRGN_SETRECT << a[i];
+	    }
+	}
+	else {
+	    s << (TQ_UINT32)(4+4+16*a.size()); // 16: storage size of TQRect
+	    s << (TQ_INT32)TQRGN_RECTS;
+	    s << (TQ_UINT32)a.size();
+	    for ( int i=0; i<(int)a.size(); i++ )
+		s << a[i];
+	}
+    }
+    return s;
+}
+
+/*!
+    \relates TQRegion
+
+    Reads a region from the stream \a s into \a r and returns a
+    reference to the stream.
+
+    \sa \link datastreamformat.html Format of the TQDataStream operators \endlink
+*/
+
+TQDataStream &operator>>( TQDataStream &s, TQRegion &r )
+{
+    TQByteArray b;
+    s >> b;
+    r.exec( b, s.version() );
+    return s;
+}
+#endif //TQT_NO_DATASTREAM
+
+// These are not inline - they can be implemented better on some platforms
+//  (eg. Windows at least provides 3-variable operations).  For now, simple.
+
+
+/*!
+    Applies the unite() function to this region and \a r. \c r1|r2 is
+    equivalent to \c r1.unite(r2)
+
+    \sa unite(), operator+()
+*/
+const TQRegion TQRegion::operator|( const TQRegion &r ) const
+    { return unite(r); }
+
+/*!
+    Applies the unite() function to this region and \a r. \c r1+r2 is
+    equivalent to \c r1.unite(r2)
+
+    \sa unite(), operator|()
+*/
+const TQRegion TQRegion::operator+( const TQRegion &r ) const
+    { return unite(r); }
+
+/*!
+    Applies the intersect() function to this region and \a r. \c r1&r2
+    is equivalent to \c r1.intersect(r2)
+
+    \sa intersect()
+*/
+const TQRegion TQRegion::operator&( const TQRegion &r ) const
+    { return intersect(r); }
+
+/*!
+    Applies the subtract() function to this region and \a r. \c r1-r2
+    is equivalent to \c r1.subtract(r2)
+
+    \sa subtract()
+*/
+const TQRegion TQRegion::operator-( const TQRegion &r ) const
+    { return subtract(r); }
+
+/*!
+    Applies the eor() function to this region and \a r. \c r1^r2 is
+    equivalent to \c r1.eor(r2)
+
+    \sa eor()
+*/
+const TQRegion TQRegion::operator^( const TQRegion &r ) const
+    { return eor(r); }
+
+/*!
+    Applies the unite() function to this region and \a r and assigns
+    the result to this region. \c r1|=r2 is equivalent to \c
+    r1=r1.unite(r2)
+
+    \sa unite()
+*/
+TQRegion& TQRegion::operator|=( const TQRegion &r )
+    { return *this = *this | r; }
+
+/*!
+    Applies the unite() function to this region and \a r and assigns
+    the result to this region. \c r1+=r2 is equivalent to \c
+    r1=r1.unite(r2)
+
+    \sa intersect()
+*/
+TQRegion& TQRegion::operator+=( const TQRegion &r )
+    { return *this = *this + r; }
+
+/*!
+    Applies the intersect() function to this region and \a r and
+    assigns the result to this region. \c r1&=r2 is equivalent to \c
+    r1=r1.intersect(r2)
+
+    \sa intersect()
+*/
+TQRegion& TQRegion::operator&=( const TQRegion &r )
+    { return *this = *this & r; }
+
+/*!
+    Applies the subtract() function to this region and \a r and
+    assigns the result to this region. \c r1-=r2 is equivalent to \c
+    r1=r1.subtract(r2)
+
+    \sa subtract()
+*/
+TQRegion& TQRegion::operator-=( const TQRegion &r )
+    { return *this = *this - r; }
+
+/*!
+    Applies the eor() function to this region and \a r and
+    assigns the result to this region. \c r1^=r2 is equivalent to \c
+    r1=r1.eor(r2)
+
+    \sa eor()
+*/
+TQRegion& TQRegion::operator^=( const TQRegion &r )
+    { return *this = *this ^ r; }
+