diff options
Diffstat (limited to 'fpga/serial/xilinx/digilent/spartan_6')
6 files changed, 739 insertions, 0 deletions
diff --git a/fpga/serial/xilinx/digilent/spartan_6/remote_access.v b/fpga/serial/xilinx/digilent/spartan_6/remote_access.v new file mode 120000 index 0000000..ccde8db --- /dev/null +++ b/fpga/serial/xilinx/digilent/spartan_6/remote_access.v @@ -0,0 +1 @@ +../../../common/remote_access.v
\ No newline at end of file diff --git a/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/data_storage.v b/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/data_storage.v new file mode 100644 index 0000000..7c9fcb0 --- /dev/null +++ b/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/data_storage.v @@ -0,0 +1,33 @@ +`timescale 1ns / 1ps +////////////////////////////////////////////////////////////////////////////////// +// +// (c) 2013 Timothy Pearson, Raptor Engineering +// Released into the Public Domain +// +////////////////////////////////////////////////////////////////////////////////// + +module data_storage( + input clka, + input [7:0] dina, + input [(RAM_ADDR_BITS-1):0] addra, + input wea, + output reg [7:0] douta); + + parameter RAM_ADDR_BITS = 14; + parameter RAM_WIDTH = 8; + + // Xilinx specific directive + (* RAM_STYLE="BLOCK" *) + + reg [RAM_WIDTH-1:0] data_storage_ram [(2**RAM_ADDR_BITS)-1:0]; + + always @(posedge clka) begin + if (wea) begin + data_storage_ram[addra] <= dina; + douta <= dina; + end else begin + douta <= data_storage_ram[addra]; + end + end + +endmodule diff --git a/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/main.ucf b/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/main.ucf new file mode 100644 index 0000000..c9a68dd --- /dev/null +++ b/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/main.ucf @@ -0,0 +1,8 @@ +# (c) 2013 Timothy Pearson, Raptor Engineering +# Released into the Public Domain + +NET "clk" LOC = "V10" | IOSTANDARD = "LVCMOS33"; +TIMESPEC TS_clk = PERIOD clk 100000 kHz; + +NET "serial_input" LOC = "T12" | IOSTANDARD = "LVCMOS33"; +NET "serial_output" LOC = "M10" | IOSTANDARD = "LVCMOS33"; diff --git a/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/main.v b/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/main.v new file mode 100644 index 0000000..b852a6d --- /dev/null +++ b/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/main.v @@ -0,0 +1,330 @@ +`timescale 1ns / 1ps
+//////////////////////////////////////////////////////////////////////////////////
+// Company: Raptor Engineering
+// Engineer: Timothy Pearson
+//
+// Design Name: Remote Access Sample Design
+// Module Name: sample_demo
+// Project Name: Remote Access Sample Design
+// Target Devices: Any
+// Description: Remote Access Sample Design
+//
+// Dependencies:
+//
+// (c) 2007-2013 Timothy Pearson, Raptor Engineering
+// Released into the Public Domain
+//
+//////////////////////////////////////////////////////////////////////////////////
+module main(
+ input clk, // 100MHz clock
+
+ // Serial port
+ input serial_input,
+ output serial_output);
+
+ parameter RAM_ADDR_BITS = 14;
+
+ wire [7:0] four_bit_output; // Output from the user program to the remote access module
+ wire [7:0] four_bit_input; // Input to the user program from the remote access module
+ wire [7:0] eight_bit_output; // Output from the user program to the remote access module
+ wire [7:0] eight_bit_input; // Input to the user program from the remote access module
+ wire [15:0] sixteen_bit_output; // Output from the user program to the remote access module
+ wire [15:0] sixteen_bit_input; // Input to the user program from the remote access module
+
+ wire [7:0] remote_access_local_input;
+
+ reg [7:0] serial_data_to_write;
+ wire sieze_serial_tx;
+ reg serial_tx_strobe = 0;
+ wire serial_data_received;
+ wire serial_rx_strobe;
+
+ wire [5:0] lcd_data_in_address;
+ wire [7:0] lcd_data_in_data;
+ wire lcd_data_in_enable;
+
+ wire [7:0] led_segment_bus;
+ wire [3:0] led_digit_select;
+
+ //-------------------------------------------------------------------------------------------------------
+ //
+ // Generate a 50MHz clock for the remote access module
+ //
+ //-------------------------------------------------------------------------------------------------------
+
+ reg main_fifty_clock = 0;
+ always @(posedge clk) begin
+ main_fifty_clock = !main_fifty_clock;
+ end
+
+ //-------------------------------------------------------------------------------------------------------
+ //
+ // Generate a 25MHz clock for the user progam
+ //
+ //-------------------------------------------------------------------------------------------------------
+
+ reg clk_div_by_two = 0;
+ always @(posedge main_fifty_clock) begin
+ clk_div_by_two = !clk_div_by_two;
+ end
+
+ //-------------------------------------------------------------------------------------------------------
+ //
+ // Remote Access Module
+ //
+ // Inputs:
+ // .clk: 50MHz clock
+ // .four_bit_input 4-bit input to the user program from the remote access module
+ // .eight_bit_input 8-bit input to the user program from the remote access module
+ // .sixteen_bit_input 16-bit input to the user program from the remote access module
+ // .serial_port_receiver Input from the serial port's RxD (receive data) pin
+ // .remote_access_input_enable Toggle remote access input vs. local input mode
+ // .local_input Local input to the remote program
+ // .seize_serial_tx Sieze control of the serial transmitter from the remote control system
+ // .serial_tx_data Byte to be transmitted on transmit strobe if control has been siezed
+ // .serial_tx_strobe Transmit serial data on posedge if transmit control has been siezed
+ // .lcd_data_in_address LCD character address (0-32) to write character code to
+ // .lcd_data_in_data LCD character code to write to the address specified
+ // .lcd_data_in_enable Enable LCD data write
+ // .sram_wren_in Synchronous SRAM write enable (1=write, 0=read)
+ // .sram_clock_in Synchronous SRAM clock input
+ // .sram_data_in Synchronous SRAM data input (8-bit)
+ // .sram_address_in Synchronous SRAM address input (14-bit by default)
+ // .sram_processing_done When 1, signal release of user control of synchronous SRAM
+ // .led_segment_bus Connect directly to the 8 bits controlling the LED display segments
+ // .led_digit_select Connect directly to the 4 bits enabling the LED display digits
+ //
+ // Outputs:
+ // .four_bit_output 4-bit output from the user program to the remote access module
+ // .eight_bit_output 8-bit output from the user program to the remote access module
+ // .sixteen_bit_output 16-bit output from the user program to the remote access module
+ // .lcd_data_out Data output to the LCD
+ // .lcd_rs_out RS signal output to the LCD
+ // .lcd_rw_out RW signal output to the LCD
+ // .lcd_enable_out ENABLE signal output to the LCD
+ // .serial_port_transmitter Output to the serial port's TxD (transmit data) pin
+ // .serial_rx_data The last received serial data
+ // .serial_rx_strobe Recevied serial data valid while this signal is 1
+ // .sram_data_out Synchronous SRAM data output (8-bit)
+ // .sram_available Synchronous SRAM under user control
+ //
+ //-------------------------------------------------------------------------------------------------------
+
+ wire sram_wren_in;
+ wire sram_clock_in;
+ wire [7:0] sram_data_in;
+ wire [(RAM_ADDR_BITS-1):0] sram_address_in;
+ wire [7:0] sram_data_out;
+ wire sram_available;
+ wire sram_processing_done;
+
+ // Uncomment this block if no image processing module is provided
+ // assign sram_wren_in = 0;
+ // assign sram_data_in = 0;
+ // assign sram_address_in = 0;
+ // assign sram_processing_done = 1;
+
+ assign sram_clock_in = main_fifty_clock;
+
+ remote_access #(RAM_ADDR_BITS) remote_access(.main_fifty_clock(main_fifty_clock), .remote_access_4_bit_output(four_bit_output),
+ .remote_access_4_bit_input(four_bit_input), .remote_access_8_bit_output(eight_bit_output),
+ .remote_access_8_bit_input(eight_bit_input), .remote_access_16_bit_output(sixteen_bit_output),
+ .remote_access_16_bit_input(sixteen_bit_input),
+ .serial_port_receiver(serial_input), .serial_port_transmitter(serial_output), .remote_access_input_enable(btn_center),
+ .local_input(remote_access_local_input), .seize_serial_tx(sieze_serial_tx), .serial_tx_data(serial_data_to_write),
+ .serial_tx_strobe(serial_tx_strobe), .serial_rx_data(serial_data_received), .serial_rx_strobe(serial_rx_strobe),
+ .lcd_data_in_address(lcd_data_in_address), .lcd_data_in_data(lcd_data_in_data), .lcd_data_in_enable(lcd_data_in_enable),
+ .sram_wren_in(sram_wren_in), .sram_clock_in(sram_clock_in), .sram_data_in(sram_data_in), .sram_address_in(sram_address_in),
+ .sram_data_out(sram_data_out), .sram_available(sram_available), .sram_processing_done(sram_processing_done),
+ .led_segment_bus(led_segment_bus), .led_digit_select(led_digit_select));
+
+ assign remote_access_local_input[7:4] = 0; // Local inputs
+ assign remote_access_local_input[3:0] = 0; // Local inputs
+ assign led_bank = eight_bit_input; // Mirror input to the LEDs
+ assign sieze_serial_tx = 0; // Allow the remote control module to use the serial port
+ // If the user module must access the serial port directly, delete
+ // this assign statement and control this wire with your module.
+
+ //-------------------------------------------------------------------------------------------------------
+ //
+ // User Module Instantiation
+ //
+ // Instantiate the simple user module to display remote access input values on the LEDs and to feed
+ // button presses to the remote access module. The 16-bit remote access lines are in loopback.
+ // Feel free to delete this instantiation and the module below to replace it with your module.
+ //
+ //-------------------------------------------------------------------------------------------------------
+
+ sample_demo sample_demo(.clk(clk_div_by_two), .four_bit_input(four_bit_input), .four_bit_output(four_bit_output),
+ .eight_bit_input(eight_bit_input), .eight_bit_output(eight_bit_output), .sixteen_bit_input(sixteen_bit_input),
+ .sixteen_bit_output(sixteen_bit_output), .lcd_data_in_address(lcd_data_in_address),
+ .lcd_data_in_data(lcd_data_in_data), .lcd_data_in_enable(lcd_data_in_enable),
+ .led_segment_bus(led_segment_bus), .led_digit_select(led_digit_select));
+
+ //-------------------------------------------------------------------------------------------------------
+ //
+ // User Image Processing Module Instantiation
+ //
+ // Instantiate the simple userimage processing module to invert the bits in any images sent to the FPGA
+ //
+ //-------------------------------------------------------------------------------------------------------
+
+ sample_image_processing_demo sample_image_processing_demo(.clk(clk_div_by_two), .wren(sram_wren_in), .dout(sram_data_in), .addr(sram_address_in),
+ .din(sram_data_out), .enable(sram_available), .done(sram_processing_done));
+
+endmodule
+
+//-------------------------------------------------------------------------------------------------------
+//
+// Demo User Module
+//
+//-------------------------------------------------------------------------------------------------------
+
+module sample_demo(clk, four_bit_input, four_bit_output, eight_bit_input, eight_bit_output, sixteen_bit_input, sixteen_bit_output, lcd_data_in_address, lcd_data_in_data, lcd_data_in_enable, led_segment_bus, led_digit_select);
+ input clk;
+
+ input [3:0] four_bit_input;
+ output reg [3:0] four_bit_output;
+ input [7:0] eight_bit_input;
+ output reg [7:0] eight_bit_output;
+ input [15:0] sixteen_bit_input;
+ output reg [15:0] sixteen_bit_output;
+
+ output reg [5:0] lcd_data_in_address;
+ output reg [7:0] lcd_data_in_data;
+ output reg lcd_data_in_enable;
+
+ output reg [7:0] led_segment_bus;
+ output reg [3:0] led_digit_select;
+
+ reg [7:0] lcd_sample_counter = 48; // Create a sample LCD display counter register
+ reg [31:0] lcd_character_change_timer = 0; // Wait a certain number of cycles before loading a new character
+ reg [5:0] lcd_current_character = 0; // The current character's address
+
+ always @(posedge clk) begin
+ four_bit_output = four_bit_input; // Loopback
+ eight_bit_output = eight_bit_input[3:0] + eight_bit_input[7:4]; // Sample adder
+ sixteen_bit_output = sixteen_bit_input[15:8] * sixteen_bit_input[7:0]; // Sample multiplier
+
+ // Sample LCD display routine
+ lcd_data_in_address = lcd_current_character; // Character location on the LCD display
+ lcd_data_in_data = lcd_sample_counter; // Character code to display
+ lcd_data_in_enable = 1; // Enable data transmission
+
+ // Cycle through all character positions
+ lcd_current_character = lcd_current_character + 1;
+ if (lcd_current_character > 31) begin
+ lcd_current_character = 16;
+ end
+
+ // Cycle through the numbers 0 to 9 at one second intervals
+ lcd_character_change_timer = lcd_character_change_timer + 1;
+ if (lcd_character_change_timer > 25000000) begin // Wait one second in between character changes
+ lcd_character_change_timer = 0;
+ lcd_sample_counter = lcd_sample_counter + 1;
+ if (lcd_sample_counter > 57) begin // Character code for the digit 9
+ lcd_sample_counter = 48; // Character code for the digit 0
+ end
+ end
+ end
+
+ // 7-segment LED display driver clock generator
+ reg sseg_clock;
+ reg [4:0] sseg_clock_counter;
+
+ always @(posedge clk) begin
+ sseg_clock_counter = sseg_clock_counter + 1;
+ if (sseg_clock_counter > 16) begin
+ sseg_clock_counter = 0;
+ sseg_clock = ~sseg_clock;
+ end
+ end
+
+ // 7-segment LED display driver
+ // led_segment_bus and led_digit_select are active low
+ // The bit sequence, MSB to LSB, is dp a b c d e f g
+ // Segment letters are taken from ug130.pdf page 15
+
+ // 0: 8'b10000001
+ // 1: 8'b11001111
+ // 2: 8'b10010010
+ // 3: 8'b10000110
+ reg [2:0] current_anode;
+ always @(posedge sseg_clock) begin
+ current_anode = current_anode + 1;
+ if (current_anode > 3) begin
+ current_anode = 0;
+ end
+
+ case (current_anode)
+ 0: begin
+ led_digit_select = 4'b1110;
+ led_segment_bus = 8'b10000001;
+ end
+ 1: begin
+ led_digit_select = 4'b1101;
+ led_segment_bus = 8'b11001111;
+ end
+ 2: begin
+ led_digit_select = 4'b1011;
+ led_segment_bus = 8'b10010010;
+ end
+ 3: begin
+ led_digit_select = 4'b0111;
+ led_segment_bus = 8'b10000110;
+ end
+ endcase
+ end
+endmodule
+
+//-------------------------------------------------------------------------------------------------------
+//
+// Demo User Image Processing Module
+//
+//-------------------------------------------------------------------------------------------------------
+
+module sample_image_processing_demo(clk, wren, dout, addr, din, enable, done);
+ parameter IMAGE_RAM_ADDR_BITS = 14;
+
+ input clk;
+
+ output reg wren;
+ output reg [7:0] dout;
+ output reg [(IMAGE_RAM_ADDR_BITS-1):0] addr;
+ input [7:0] din;
+ input enable;
+ output reg done;
+
+ reg prev_enable;
+ reg [IMAGE_RAM_ADDR_BITS:0] counter;
+ reg toggler;
+
+ always @(posedge clk) begin
+ if ((enable == 1) && (prev_enable == 0)) begin
+ counter = 0;
+ toggler = 0;
+ end
+ if ((enable == 1) && (done == 0)) begin
+ if (toggler == 0) begin
+ wren = 0;
+ addr = counter;
+ toggler = 1;
+ end else begin
+ dout = ~din;
+ wren = 1;
+ addr = counter;
+ counter = counter + 1;
+ if (counter > (2**IMAGE_RAM_ADDR_BITS)) begin
+ done = 1;
+ end
+ toggler = 0;
+ end
+ end
+ if (enable == 0) begin
+ done = 0;
+ addr = 0;
+ toggler = 0;
+ end
+ prev_enable = enable;
+ end
+endmodule
diff --git a/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/remote_access.v b/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/remote_access.v new file mode 120000 index 0000000..a018632 --- /dev/null +++ b/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/remote_access.v @@ -0,0 +1 @@ +../remote_access.v
\ No newline at end of file diff --git a/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/s6_remotefpga_test.xise b/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/s6_remotefpga_test.xise new file mode 100644 index 0000000..45b9e22 --- /dev/null +++ b/fpga/serial/xilinx/digilent/spartan_6/s6_remotefpga_test/s6_remotefpga_test.xise @@ -0,0 +1,366 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema"> + + <header> + <!-- ISE source project file created by Project Navigator. --> + <!-- --> + <!-- This file contains project source information including a list of --> + <!-- project source files, project and process properties. This file, --> + <!-- along with the project source files, is sufficient to open and --> + <!-- implement in ISE Project Navigator. --> + <!-- --> + <!-- Copyright (c) 1995-2012 Xilinx, Inc. All rights reserved. --> + </header> + + <version xil_pn:ise_version="14.4" xil_pn:schema_version="2"/> + + <files> + <file xil_pn:name="remote_access.v" xil_pn:type="FILE_VERILOG"> + <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="1"/> + <association xil_pn:name="Implementation" xil_pn:seqID="2"/> + </file> + <file xil_pn:name="main.v" xil_pn:type="FILE_VERILOG"> + <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/> + <association xil_pn:name="Implementation" xil_pn:seqID="3"/> + </file> + <file xil_pn:name="main.ucf" xil_pn:type="FILE_UCF"> + <association xil_pn:name="Implementation" xil_pn:seqID="0"/> + </file> + <file xil_pn:name="data_storage.v" xil_pn:type="FILE_VERILOG"> + <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="62"/> + <association xil_pn:name="Implementation" xil_pn:seqID="1"/> + </file> + </files> + + <properties> + <property xil_pn:name="AES Initial Vector spartan6" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="AES Key (Hex String) spartan6" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Add I/O Buffers" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Allow Logic Optimization Across Hierarchy" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Allow SelectMAP Pins to Persist" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Allow Unexpanded Blocks" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Allow Unmatched LOC Constraints" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Allow Unmatched Timing Group Constraints" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Analysis Effort Level" xil_pn:value="Standard" xil_pn:valueState="default"/> + <property xil_pn:name="Asynchronous To Synchronous" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Auto Implementation Compile Order" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Auto Implementation Top" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Automatic BRAM Packing" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Automatically Insert glbl Module in the Netlist" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Automatically Run Generate Target PROM/ACE File" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="BRAM Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/> + <property xil_pn:name="Bring Out Global Set/Reset Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Bring Out Global Tristate Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Bus Delimiter" xil_pn:value="<>" xil_pn:valueState="default"/> + <property xil_pn:name="Case" xil_pn:value="Maintain" xil_pn:valueState="default"/> + <property xil_pn:name="Case Implementation Style" xil_pn:value="None" xil_pn:valueState="default"/> + <property xil_pn:name="Change Device Speed To" xil_pn:value="-3" xil_pn:valueState="default"/> + <property xil_pn:name="Change Device Speed To Post Trace" xil_pn:value="-3" xil_pn:valueState="default"/> + <property xil_pn:name="Combinatorial Logic Optimization" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Compile EDK Simulation Library" xil_pn:value="false" xil_pn:valueState="non-default"/> + <property xil_pn:name="Compile SIMPRIM (Timing) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Compile UNISIM (Functional) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Compile XilinxCoreLib (CORE Generator) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Compile for HDL Debugging" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Configuration Pin Done" xil_pn:value="Pull Up" xil_pn:valueState="default"/> + <property xil_pn:name="Configuration Pin Program" xil_pn:value="Pull Up" xil_pn:valueState="default"/> + <property xil_pn:name="Configuration Rate spartan6" xil_pn:value="2" xil_pn:valueState="default"/> + <property xil_pn:name="Correlate Output to Input Design" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Create ASCII Configuration File" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Create Binary Configuration File" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Create Bit File" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Create I/O Pads from Ports" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Create IEEE 1532 Configuration File spartan6" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Create Logic Allocation File" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Create Mask File" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Create ReadBack Data Files" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Cross Clock Analysis" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="DSP Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/> + <property xil_pn:name="Delay Values To Be Read from SDF" xil_pn:value="Setup Time" xil_pn:valueState="default"/> + <property xil_pn:name="Device" xil_pn:value="xc6slx16" xil_pn:valueState="non-default"/> + <property xil_pn:name="Device Family" xil_pn:value="Spartan6" xil_pn:valueState="non-default"/> + <property xil_pn:name="Device Speed Grade/Select ABS Minimum" xil_pn:value="-3" xil_pn:valueState="default"/> + <property xil_pn:name="Disable Detailed Package Model Insertion" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Do Not Escape Signal and Instance Names in Netlist" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Done (Output Events)" xil_pn:value="Default (4)" xil_pn:valueState="default"/> + <property xil_pn:name="Drive Awake Pin During Suspend/Wake Sequence spartan6" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Drive Done Pin High" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Enable BitStream Compression" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Enable Cyclic Redundancy Checking (CRC) spartan6" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Enable Debugging of Serial Mode BitStream" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Enable External Master Clock spartan6" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Enable Hardware Co-Simulation" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Enable Message Filtering" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Enable Multi-Pin Wake-Up Suspend Mode spartan6" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Enable Multi-Threading" xil_pn:value="Off" xil_pn:valueState="default"/> + <property xil_pn:name="Enable Multi-Threading par spartan6" xil_pn:value="Off" xil_pn:valueState="default"/> + <property xil_pn:name="Enable Outputs (Output Events)" xil_pn:value="Default (5)" xil_pn:valueState="default"/> + <property xil_pn:name="Enable Suspend/Wake Global Set/Reset spartan6" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Encrypt Bitstream spartan6" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Encrypt Key Select spartan6" xil_pn:value="BBRAM" xil_pn:valueState="default"/> + <property xil_pn:name="Equivalent Register Removal Map" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Equivalent Register Removal XST" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Essential Bits" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Evaluation Development Board" xil_pn:value="None Specified" xil_pn:valueState="default"/> + <property xil_pn:name="Exclude Compilation of Deprecated EDK Cores" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Exclude Compilation of EDK Sub-Libraries" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Extra Cost Tables Map" xil_pn:value="0" xil_pn:valueState="default"/> + <property xil_pn:name="Extra Effort (Highest PAR level only)" xil_pn:value="None" xil_pn:valueState="default"/> + <property xil_pn:name="FPGA Start-Up Clock" xil_pn:value="CCLK" xil_pn:valueState="default"/> + <property xil_pn:name="FSM Encoding Algorithm" xil_pn:value="Auto" xil_pn:valueState="default"/> + <property xil_pn:name="FSM Style" xil_pn:value="LUT" xil_pn:valueState="default"/> + <property xil_pn:name="Filter Files From Compile Order" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Flatten Output Netlist" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Functional Model Target Language ArchWiz" xil_pn:value="Verilog" xil_pn:valueState="default"/> + <property xil_pn:name="Functional Model Target Language Coregen" xil_pn:value="Verilog" xil_pn:valueState="default"/> + <property xil_pn:name="Functional Model Target Language Schematic" xil_pn:value="Verilog" xil_pn:valueState="default"/> + <property xil_pn:name="GTS Cycle During Suspend/Wakeup Sequence spartan6" xil_pn:value="4" xil_pn:valueState="default"/> + <property xil_pn:name="GWE Cycle During Suspend/Wakeup Sequence spartan6" xil_pn:value="5" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Architecture Only (No Entity Declaration)" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Asynchronous Delay Report" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Clock Region Report" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Constraints Interaction Report" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Constraints Interaction Report Post Trace" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Datasheet Section" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Datasheet Section Post Trace" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Detailed MAP Report" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Multiple Hierarchical Netlist Files" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Post-Place & Route Power Report" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Post-Place & Route Simulation Model" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate RTL Schematic" xil_pn:value="Yes" xil_pn:valueState="default"/> + <property xil_pn:name="Generate SAIF File for Power Optimization/Estimation Par" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Testbench File" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Timegroups Section" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generate Timegroups Section Post Trace" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Generics, Parameters" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Global Optimization Goal" xil_pn:value="AllClockNets" xil_pn:valueState="default"/> + <property xil_pn:name="Global Optimization map spartan6" xil_pn:value="Off" xil_pn:valueState="default"/> + <property xil_pn:name="Global Set/Reset Port Name" xil_pn:value="GSR_PORT" xil_pn:valueState="default"/> + <property xil_pn:name="Global Tristate Port Name" xil_pn:value="GTS_PORT" xil_pn:valueState="default"/> + <property xil_pn:name="Hierarchy Separator" xil_pn:value="/" xil_pn:valueState="default"/> + <property xil_pn:name="ISim UUT Instance Name" xil_pn:value="UUT" xil_pn:valueState="default"/> + <property xil_pn:name="Ignore User Timing Constraints Map" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Ignore User Timing Constraints Par" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Implementation Top" xil_pn:value="Module|main" xil_pn:valueState="non-default"/> + <property xil_pn:name="Implementation Top File" xil_pn:value="main.v" xil_pn:valueState="non-default"/> + <property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/main" xil_pn:valueState="non-default"/> + <property xil_pn:name="Include 'uselib Directive in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Include SIMPRIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Include UNISIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Include sdf_annotate task in Verilog File" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Incremental Compilation" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Insert Buffers to Prevent Pulse Swallowing" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Instantiation Template Target Language Xps" xil_pn:value="Verilog" xil_pn:valueState="default"/> + <property xil_pn:name="JTAG Pin TCK" xil_pn:value="Pull Up" xil_pn:valueState="default"/> + <property xil_pn:name="JTAG Pin TDI" xil_pn:value="Pull Up" xil_pn:valueState="default"/> + <property xil_pn:name="JTAG Pin TDO" xil_pn:value="Pull Up" xil_pn:valueState="default"/> + <property xil_pn:name="JTAG Pin TMS" xil_pn:value="Pull Up" xil_pn:valueState="default"/> + <property xil_pn:name="Keep Hierarchy" xil_pn:value="No" xil_pn:valueState="default"/> + <property xil_pn:name="LUT Combining Map" xil_pn:value="Off" xil_pn:valueState="default"/> + <property xil_pn:name="LUT Combining Xst" xil_pn:value="Auto" xil_pn:valueState="default"/> + <property xil_pn:name="Language" xil_pn:value="VHDL" xil_pn:valueState="default"/> + <property xil_pn:name="Last Applied Goal" xil_pn:value="Balanced" xil_pn:valueState="default"/> + <property xil_pn:name="Last Applied Strategy" xil_pn:value="Xilinx Default (unlocked)" xil_pn:valueState="default"/> + <property xil_pn:name="Last Unlock Status" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Launch SDK after Export" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Library for Verilog Sources" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Load glbl" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Manual Implementation Compile Order" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Map Slice Logic into Unused Block RAMs" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Mask Pins for Multi-Pin Wake-Up Suspend Mode spartan6" xil_pn:value="0x00" xil_pn:valueState="default"/> + <property xil_pn:name="Max Fanout" xil_pn:value="100000" xil_pn:valueState="default"/> + <property xil_pn:name="Maximum Compression" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Maximum Number of Lines in Report" xil_pn:value="1000" xil_pn:valueState="default"/> + <property xil_pn:name="Maximum Signal Name Length" xil_pn:value="20" xil_pn:valueState="default"/> + <property xil_pn:name="Move First Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Move Last Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="MultiBoot: Insert IPROG CMD in the Bitfile spartan6" xil_pn:value="Enable" xil_pn:valueState="default"/> + <property xil_pn:name="MultiBoot: Next Configuration Mode spartan6" xil_pn:value="001" xil_pn:valueState="default"/> + <property xil_pn:name="MultiBoot: Starting Address for Golden Configuration spartan6" xil_pn:value="0x00000000" xil_pn:valueState="default"/> + <property xil_pn:name="MultiBoot: Starting Address for Next Configuration spartan6" xil_pn:value="0x00000000" xil_pn:valueState="default"/> + <property xil_pn:name="MultiBoot: Use New Mode for Next Configuration spartan6" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="MultiBoot: User-Defined Register for Failsafe Scheme spartan6" xil_pn:value="0x0000" xil_pn:valueState="default"/> + <property xil_pn:name="Netlist Hierarchy" xil_pn:value="As Optimized" xil_pn:valueState="default"/> + <property xil_pn:name="Netlist Translation Type" xil_pn:value="Timestamp" xil_pn:valueState="default"/> + <property xil_pn:name="Number of Clock Buffers" xil_pn:value="16" xil_pn:valueState="default"/> + <property xil_pn:name="Number of Paths in Error/Verbose Report" xil_pn:value="3" xil_pn:valueState="default"/> + <property xil_pn:name="Number of Paths in Error/Verbose Report Post Trace" xil_pn:value="3" xil_pn:valueState="default"/> + <property xil_pn:name="Optimization Effort spartan6" xil_pn:value="Normal" xil_pn:valueState="default"/> + <property xil_pn:name="Optimization Goal" xil_pn:value="Speed" xil_pn:valueState="default"/> + <property xil_pn:name="Optimize Instantiated Primitives" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Other Bitgen Command Line Options spartan6" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Compiler Options" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Compiler Options Map" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Compiler Options Par" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Compiler Options Translate" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Compxlib Command Line Options" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Map Command Line Options" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other NETGEN Command Line Options" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Ngdbuild Command Line Options" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Place & Route Command Line Options" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Simulator Commands Behavioral" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Simulator Commands Post-Map" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Simulator Commands Post-Route" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other Simulator Commands Post-Translate" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other XPWR Command Line Options" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Other XST Command Line Options" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Output Extended Identifiers" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Output File Name" xil_pn:value="main" xil_pn:valueState="default"/> + <property xil_pn:name="Overwrite Compiled Libraries" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Pack I/O Registers into IOBs" xil_pn:value="Auto" xil_pn:valueState="default"/> + <property xil_pn:name="Pack I/O Registers/Latches into IOBs" xil_pn:value="Off" xil_pn:valueState="default"/> + <property xil_pn:name="Package" xil_pn:value="csg324" xil_pn:valueState="default"/> + <property xil_pn:name="Perform Advanced Analysis" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Perform Advanced Analysis Post Trace" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Perform Timing-Driven Packing and Placement" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Place & Route Effort Level (Overall)" xil_pn:value="High" xil_pn:valueState="default"/> + <property xil_pn:name="Place And Route Mode" xil_pn:value="Normal Place and Route" xil_pn:valueState="default"/> + <property xil_pn:name="Place MultiBoot Settings into Bitstream spartan6" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Placer Effort Level Map" xil_pn:value="High" xil_pn:valueState="default"/> + <property xil_pn:name="Placer Extra Effort Map" xil_pn:value="None" xil_pn:valueState="default"/> + <property xil_pn:name="Port to be used" xil_pn:value="Auto - default" xil_pn:valueState="default"/> + <property xil_pn:name="Post Map Simulation Model Name" xil_pn:value="main_map.v" xil_pn:valueState="default"/> + <property xil_pn:name="Post Place & Route Simulation Model Name" xil_pn:value="main_timesim.v" xil_pn:valueState="default"/> + <property xil_pn:name="Post Synthesis Simulation Model Name" xil_pn:value="main_synthesis.v" xil_pn:valueState="default"/> + <property xil_pn:name="Post Translate Simulation Model Name" xil_pn:value="main_translate.v" xil_pn:valueState="default"/> + <property xil_pn:name="Power Reduction Map spartan6" xil_pn:value="Off" xil_pn:valueState="default"/> + <property xil_pn:name="Power Reduction Par" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Power Reduction Xst" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Preferred Language" xil_pn:value="Verilog" xil_pn:valueState="default"/> + <property xil_pn:name="Produce Verbose Report" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Project Description" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/> + <property xil_pn:name="RAM Extraction" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="RAM Style" xil_pn:value="Auto" xil_pn:valueState="default"/> + <property xil_pn:name="ROM Extraction" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="ROM Style" xil_pn:value="Auto" xil_pn:valueState="default"/> + <property xil_pn:name="Read Cores" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Reduce Control Sets" xil_pn:value="Auto" xil_pn:valueState="default"/> + <property xil_pn:name="Regenerate Core" xil_pn:value="Under Current Project Setting" xil_pn:valueState="default"/> + <property xil_pn:name="Register Balancing" xil_pn:value="No" xil_pn:valueState="default"/> + <property xil_pn:name="Register Duplication Map" xil_pn:value="Off" xil_pn:valueState="default"/> + <property xil_pn:name="Register Duplication Xst" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Register Ordering spartan6" xil_pn:value="4" xil_pn:valueState="default"/> + <property xil_pn:name="Release Write Enable (Output Events)" xil_pn:value="Default (6)" xil_pn:valueState="default"/> + <property xil_pn:name="Rename Design Instance in Testbench File to" xil_pn:value="UUT" xil_pn:valueState="default"/> + <property xil_pn:name="Rename Top Level Architecture To" xil_pn:value="Structure" xil_pn:valueState="default"/> + <property xil_pn:name="Rename Top Level Entity to" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Rename Top Level Module To" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Report Fastest Path(s) in Each Constraint" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Report Fastest Path(s) in Each Constraint Post Trace" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Report Paths by Endpoint" xil_pn:value="3" xil_pn:valueState="default"/> + <property xil_pn:name="Report Paths by Endpoint Post Trace" xil_pn:value="3" xil_pn:valueState="default"/> + <property xil_pn:name="Report Type" xil_pn:value="Verbose Report" xil_pn:valueState="default"/> + <property xil_pn:name="Report Type Post Trace" xil_pn:value="Verbose Report" xil_pn:valueState="default"/> + <property xil_pn:name="Report Unconstrained Paths" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Report Unconstrained Paths Post Trace" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Reset On Configuration Pulse Width" xil_pn:value="100" xil_pn:valueState="default"/> + <property xil_pn:name="Resource Sharing" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Retain Hierarchy" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Retry Configuration if CRC Error Occurs spartan6" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Run Design Rules Checker (DRC)" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Run for Specified Time" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Run for Specified Time Map" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Run for Specified Time Par" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Run for Specified Time Translate" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Safe Implementation" xil_pn:value="No" xil_pn:valueState="default"/> + <property xil_pn:name="Security" xil_pn:value="Enable Readback and Reconfiguration" xil_pn:valueState="default"/> + <property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Selected Simulation Root Source Node Post-Map" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Selected Simulation Root Source Node Post-Route" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Selected Simulation Root Source Node Post-Translate" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Selected Simulation Source Node" xil_pn:value="UUT" xil_pn:valueState="default"/> + <property xil_pn:name="Set SPI Configuration Bus Width spartan6" xil_pn:value="1" xil_pn:valueState="default"/> + <property xil_pn:name="Setup External Master Clock Division spartan6" xil_pn:value="1" xil_pn:valueState="default"/> + <property xil_pn:name="Shift Register Extraction" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Shift Register Minimum Size spartan6" xil_pn:value="2" xil_pn:valueState="default"/> + <property xil_pn:name="Show All Models" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Simulation Model Target" xil_pn:value="Verilog" xil_pn:valueState="default"/> + <property xil_pn:name="Simulation Run Time ISim" xil_pn:value="1000 ns" xil_pn:valueState="default"/> + <property xil_pn:name="Simulation Run Time Map" xil_pn:value="1000 ns" xil_pn:valueState="default"/> + <property xil_pn:name="Simulation Run Time Par" xil_pn:value="1000 ns" xil_pn:valueState="default"/> + <property xil_pn:name="Simulation Run Time Translate" xil_pn:value="1000 ns" xil_pn:valueState="default"/> + <property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/> + <property xil_pn:name="Slice Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/> + <property xil_pn:name="Specify 'define Macro Name and Value" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Specify Top Level Instance Names Behavioral" xil_pn:value="Default" xil_pn:valueState="default"/> + <property xil_pn:name="Specify Top Level Instance Names Post-Map" xil_pn:value="Default" xil_pn:valueState="default"/> + <property xil_pn:name="Specify Top Level Instance Names Post-Route" xil_pn:value="Default" xil_pn:valueState="default"/> + <property xil_pn:name="Specify Top Level Instance Names Post-Translate" xil_pn:value="Default" xil_pn:valueState="default"/> + <property xil_pn:name="Speed Grade" xil_pn:value="-3" xil_pn:valueState="default"/> + <property xil_pn:name="Starting Placer Cost Table (1-100) Map spartan6" xil_pn:value="1" xil_pn:valueState="default"/> + <property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/> + <property xil_pn:name="Target Simulator" xil_pn:value="Please Specify" xil_pn:valueState="default"/> + <property xil_pn:name="Target UCF File Name" xil_pn:value="main.ucf" xil_pn:valueState="non-default"/> + <property xil_pn:name="Timing Mode Map" xil_pn:value="Performance Evaluation" xil_pn:valueState="default"/> + <property xil_pn:name="Timing Mode Par" xil_pn:value="Performance Evaluation" xil_pn:valueState="default"/> + <property xil_pn:name="Top-Level Module Name in Output Netlist" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/> + <property xil_pn:name="Trim Unconnected Signals" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Tristate On Configuration Pulse Width" xil_pn:value="0" xil_pn:valueState="default"/> + <property xil_pn:name="Unused IOB Pins" xil_pn:value="Pull Down" xil_pn:valueState="default"/> + <property xil_pn:name="Use 64-bit PlanAhead on 64-bit Systems" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Use Clock Enable" xil_pn:value="Auto" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Project File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Project File Post-Map" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Project File Post-Route" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Project File Post-Translate" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Simulation Command File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Simulation Command File Map" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Simulation Command File Par" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Simulation Command File Translate" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Waveform Configuration File Behav" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Waveform Configuration File Map" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Waveform Configuration File Par" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Custom Waveform Configuration File Translate" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use DSP Block spartan6" xil_pn:value="Auto" xil_pn:valueState="default"/> + <property xil_pn:name="Use LOC Constraints" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="Use RLOC Constraints" xil_pn:value="Yes" xil_pn:valueState="default"/> + <property xil_pn:name="Use Smart Guide" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Use Synchronous Reset" xil_pn:value="Auto" xil_pn:valueState="default"/> + <property xil_pn:name="Use Synchronous Set" xil_pn:value="Auto" xil_pn:valueState="default"/> + <property xil_pn:name="Use Synthesis Constraints File" xil_pn:value="true" xil_pn:valueState="default"/> + <property xil_pn:name="User Browsed Strategy Files" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="UserID Code (8 Digit Hexadecimal)" xil_pn:value="0xFFFFFFFF" xil_pn:valueState="default"/> + <property xil_pn:name="VCCAUX Voltage Level spartan6" xil_pn:value="2.5V" xil_pn:valueState="default"/> + <property xil_pn:name="VHDL Source Analysis Standard" xil_pn:value="VHDL-93" xil_pn:valueState="default"/> + <property xil_pn:name="Value Range Check" xil_pn:value="false" xil_pn:valueState="default"/> + <property xil_pn:name="Verilog Macros" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="Wait for DCM and PLL Lock (Output Events) spartan6" xil_pn:value="Default (NoWait)" xil_pn:valueState="default"/> + <property xil_pn:name="Wakeup Clock spartan6" xil_pn:value="Startup Clock" xil_pn:valueState="default"/> + <property xil_pn:name="Watchdog Timer Value spartan6" xil_pn:value="0xFFFF" xil_pn:valueState="default"/> + <property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/> + <property xil_pn:name="Write Timing Constraints" xil_pn:value="false" xil_pn:valueState="default"/> + <!-- --> + <!-- The following properties are for internal use only. These should not be modified.--> + <!-- --> + <property xil_pn:name="PROP_BehavioralSimTop" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="PROP_DesignName" xil_pn:value="s6_remotefpga_test" xil_pn:valueState="non-default"/> + <property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan6" xil_pn:valueState="default"/> + <property xil_pn:name="PROP_FPGAConfiguration" xil_pn:value="FPGAConfiguration" xil_pn:valueState="default"/> + <property xil_pn:name="PROP_PostMapSimTop" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="PROP_PostParSimTop" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="PROP_PostSynthSimTop" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="PROP_PostXlateSimTop" xil_pn:value="" xil_pn:valueState="default"/> + <property xil_pn:name="PROP_PreSynthesis" xil_pn:value="PreSynthesis" xil_pn:valueState="default"/> + <property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2013-03-03T01:45:17" xil_pn:valueState="non-default"/> + <property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="6E464769C51A5363CC11E7DB5F4485BE" xil_pn:valueState="non-default"/> + <property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/> + <property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/> + </properties> + + <bindings/> + + <libraries/> + + <autoManagedFiles> + <!-- The following files are identified by `include statements in verilog --> + <!-- source files and are automatically managed by Project Navigator. --> + <!-- --> + <!-- Do not hand-edit this section, as it will be overwritten when the --> + <!-- project is analyzed based on files automatically identified as --> + <!-- include files. --> + </autoManagedFiles> + +</project> |